|◀ 25 - 36 of 63 ▶|
View:

UNIVERSAL SOLE PATH COMMERCIAL FIRE COMMUNICATOR

This item has been discontinued and replaced by item 

MQ03-LTE-M-FIRE-AV Specifications

  • Multi-band CAT M1 LTE 700/850/1700/1900/2100 MHz
    cellular communicator for AT&T and Verizon LTE-M networks
  • Dual-SIM for AT&T/Verizon
  • Dual Ring & Tip 
  • Dial Capture interface supporting ContactID, SIA and Pulse 4+2
  • 4 digital inputs, 2 digital outputs (programmable)
  • Dual-path: LAN and cellular channels 
  • Supply voltage: +12 to +30 VDC 
  • Power Consumption: Nominal 50mA, Peak 200 mA
  • Compact Dimensions: 2.48" x 3.54" x 1.26"
  • Weight: 2.65 oz (75 g) without antenna
Item#:
MQ03-LTE-M-FIRE-AV
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Uses LTE network for highspeed, reliable and low-cost communications to an IP receiver
  • Automatically switches to 3G (HSPA/HSPA+) if LTE service is not available
  • Compatible with control panels that communicate using Contact ID or SIA (300 baud) formats
  • Full event reporting
  • 4 on-board inputs with NC, NO or SEOL supervision
  • 4 on-board outputs (open collector)
  • Activation and initialization via website or mobile interface provided by C24 Communications
  • View communicator status directly from your mobile phone to support on-site or remote troubleshooting
  • Compatible with Sur-Gard® System I-IP/II/III/IV/5 monitoring station receivers
  • Includes UL listed power supply, transformer and 7 Ah rechargeable battery
  • UL 864 listed
  • CSFM listed
Item#:
LE4010CF-AT
You must be logged in to order this item. Log in here
Enabled by cooperation between Telguard® and Honeywell®, the HW-TG7 Fire Series starts with Telguard's model TG-7FS and adds the powerful capabilities of Honeywell's Connected Life Safety Services (CLSS) Cloud.
FEATURES AND BENEFITS
• CLSS integration for monitoring event transmission, data & management of device inventory from the  mobile app and web portal (when using Contact ID and point based reporting)
• Alarm format support for contact ID, SIA2pulse (3x1, 4x2), modem lle, IIIa, and DMP
• Certified for AT&T and Verizon LTE networks
• Meets UL 864 requirements for sole primary or backup path communications
• Minimizes false alarms by providing dual paths for self-tests
• Falls back to 3G/4G if an LTE network is not available
• Telephone line monitor built-in, with standard line security
• Automatic self-test (daily or 6-hour)
• Available relay output for tripping the alarm control panel when a trouble condition occurs
• Two programmable supervisory trip outputs
You must be logged in to order this item. Log in here

CLSS-ENABLED LTE COMMERCIAL FIRE ALARM COMMUNICATOR (Verizon)

This item has been discontinued and replaced by item 
CLSS is an innovative, all-in-one cloud solution built on Honeywell Forge, a powerful analytics platform that enables real-time data and visual intelligence for connected buildings. CLSS equips fire systems installers and facilities managers to deliver enhanced fire safety services while maximizing the performance of Honeywell’s trusted detection and notification systems

Enabled by cooperation between Telguard® and Honeywell®, the HW-TG7L Fire Series starts
with Telguard's model TG-7FS and adds the powerful capabilities of Honeywell's Connected
Life Safety Services (CLSS) Cloud
You must be logged in to order this item. Log in here
Enabled by cooperation between Telguard® and Honeywell®, the HW-TG7 Fire Series starts with Telguard's model TG-7FS and adds the powerful capabilities of Honeywell's Connected Life Safety Services (CLSS) Cloud.
FEATURES AND BENEFITS
• CLSS integration for monitoring event transmission, data & management of device inventory from the  mobile app and web portal (when using Contact ID and point based reporting)
• Alarm format support for contact ID, SIA2pulse (3x1, 4x2), modem lle, IIIa, and DMP
• Certified for AT&T and Verizon LTE networks
• Meets UL 864 requirements for sole primary or backup path communications
• Minimizes false alarms by providing dual paths for self-tests
• Falls back to 3G/4G if an LTE network is not available
• Telephone line monitor built-in, with standard line security
• Automatic self-test (daily or 6-hour)
• Available relay output for tripping the alarm control panel when a trouble condition occurs
• Two programmable supervisory trip outputs

You must be logged in to order this item. Log in here
FL-255FACP-LTVI New FireLink FACP XL 255 with sole /dual path cell &/or IP communicator & annunciator built in. (4 on board NACs providing up to 6.5A notification power). Locking, Red Enclosure, (surface or flush mount*), removable 16” x 25” door, with 14.25” x 16” base. Houses up to 32Ah battery backup.
Item#:
FL-255FACP-LTVI
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The Edwards F-DACT optional DACT/Dialer is a multifuntion communications module that provides communications, modem capability, and LCD display functions. Its primary function is as a Digital Alarm Communicator Transmitter (DACT). As a DACT, it transmits event messages to a Digital Alarm Communicator Receiver (DACR) at a monitoring facility. The monitoring facility then notifies the fire department and other responsible parties of the event. Programmable options include single or dual reporting to two DACRs.

The DACT module can also be used as a modem to connect the panel to both a local and remote computers for uploading and downloading of configuration data (programming), panel status and event history. For security, the modem can be configured to accept programming on incoming calls or it can be required to call a preprogrammed number before accepting downloads and sending uploads.

The DACT module can be configured to work as all of the above, or as only an LCD display or LCD display and modem.

*NOTE: The F-DACT cannot be used with a one zone fire alarm panel. If the application requires the F-DACT Dialer, you must purchase a panel with three or more zones.

Features

  • Supports two receivers with two phone numbers each
  • Programming from front panel controls or PC with appropriate software
  • Can function as a modem

Item#:
F-DACT
You must be logged in to order this item. Log in here

The Fire-Watch series of IP Communicators from Fire-Lite Alarms are designed to transmit fire alarm system information to central monitoring stations over any standard IP network. They connect to a Fire Alarm control panels standard telephone ports with no changes required to panels existing configuration. These communicators offer exclusive upload/download capabilities, a 512 bit encryption for added security and a reliable connection to an off-site central station monitoring facility.

Features

  • Listed to UL Standard 864, Ninth Edition when used with Fire-Lite UL 864 Ninth Edition-listed panels.
  • Eliminates the cost of two dedicated phone lines. Only the customers shared IP equipment is required.
  • Can use newer low-cost, non-analog, digital telephone services such as cable or fiber optics.
  • Increases connection supervision to the central station from the once-a-day test signal to once every 30 - 90 seconds.
  • Requires no change to the existing panel configuration. The IP Communicator connects directly to the primary and secondary analog panel telephone ports.
  • Fast alarm transmission (less than 10 second transmission time).
  • Works over any type of customer-provided Ethernet 10/100 Base network connection (LAN or WAN), DSL modem or cable modem.
  • Data transmits over standard contact-ID protocol but is secured with the industrys highest level of encryption (AES 512 bit).
  • Supports both dynamic (DHCP) or Public and Private Static IP addressing.

Item#:
IPDACT-2
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 25 - 36 of 63 ▶|
View:
(Denotes required field.)