|◀ 13 - 24 of 60 ▶|
View:
TG-7FE offers two pathways to reliably transmit signals: a wired LAN connection to the Internet and 5G LTE-M cellular. It operates on panel power or via plug-in transformer, and is available in AT&T or Verizon models.
PRODUCT FEATURES
  • Dual communication paths - If the Internet connection is interrupted or the LAN goes down, always-on 5G cellular will immediately step in.
  • Powers directly from the fire panel’s 12V/24V auxiliary power supply or via plug-in transformer (included).
  • Uses LTE-M bands for 4G and 5G network compatibility, better building penetration, and longest product life.
  • Interfaces with panel over a single DACT connection for universal compatibility (use TG-PEM accessory when panel has no DACT).
  • Telguard communicators are compatible with more alarm formats than any other brand. The signal will reliably get to the central station. 
Item#:
TG-7FE-A
You must be logged in to order this item. Log in here

Features

  • Commercial fire internet communicator
  • Works with any control panel that communicates using contact ID format
  • Configured for standalone commercial fire applications
  • Compliant with NFPA72 Editions: 2002, 2007, 2010, 2013
  • Power supply included
  • Compatible with most control panels that use the Contact ID format
  • 128-bit AES encryption (NIST approved)
  • Supports DHCP (dynamic IP addresses)
  • Low network bandwidth requirements
  • Reports events to 2 different receiver IP addresses
  • UL standard & encrypted line security
  • 4 on-board programmable zone inputs and 2 programmable voltage outputs as standalone module
  • Programmable through the PK5500 LCD keypad or T-Link Console software
  • Software upgrades via network
  • Compatible with Sur-Gard System I/II/III/IV/V monitoring station receivers
  • ULC Passive or active security levels
  • ULC active line security levels A1-A4
  • Polling and hardware substitution protection

Item#:
TL300CF
You must be logged in to order this item. Log in here

PRODUCT FEATURES

  • Powers directly from a 12 or 24VDC alarm panel — no electrician needed for an outlet.  Or, for AC, use included plug-in adapter.
  • Operates on LTE-M networks, for 5G longevity, lower power consumption, and better in-building penetration.
  • Interfaces with fire panels using a single DACT connection for universal compatibility.  
  • American made and backed by award-winning, US-based tech support.
  • Dial capture allows for easy plug-and-play
  • Compliant with 2019 and earlier editions of NFPA 72
  • Meets UL 864 requirements for sole, primary or backup path communications
  • 5-minute or 60-minute supervision
You must be logged in to order this item. Log in here
  • Commercial Fire LTE Alarm Communicator
  • Red Plastic Enclosure
  • Powered by Control Panel
  • Input: 12-24VDC (100mA @ 24VDC w/peak RF transmission draw of 200mA).
Includes:
  • (4) Programmable EOLR Zone inputs for connection to legacy FACPs
  • (2) Form C relay outputs, eliminating the need for additional listed
  • supervision relay.
  • (2) Modular RJ45 Telco jacks for easy connection to FACP.
Agency Compliance:
  • UL985 Household Fire Warning System
  • UL864 10th Edition Control Units For Fire Alarm Systems
Item#:
SLE-LTEVI-FIRE
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
COMMERCIAL FIRE
Feature-rich, with updated technology, the Telguard TG-7FP is all about saving time and money. It starts with a bundled communicator solution that powers off the panel, is 4G/5G, and costs less to purchase and install.  Add to that the savings your customers enjoy every month from replacing expensive landlines with economical cellular service.  Then, top it all off with the RMR that goes to you, not the Telco.
Item#:
TG7FPA
You must be logged in to order this item. Log in here
TG-7FE offers two pathways to reliably transmit signals: a wired LAN connection to the Internet and 5G LTE-M cellular. It operates on panel power or via plug-in transformer, and is available in AT&T or Verizon models.
PRODUCT FEATURES
  • Dual communication paths - If the Internet connection is interrupted or the LAN goes down, always-on 5G cellular will immediately step in.
  • Powers directly from the fire panel’s 12V/24V auxiliary power supply or via plug-in transformer (included).
  • Uses LTE-M bands for 4G and 5G network compatibility, better building penetration, and longest product life.
  • Interfaces with panel over a single DACT connection for universal compatibility (use TG-PEM accessory when panel has no DACT).
  • Telguard communicators are compatible with more alarm formats than any other brand. The signal will reliably get to the central station. 
Item#:
TG-7FE-V
You must be logged in to order this item. Log in here
  • StarLink Commercial LTE Fire and Burglary radio in red plastic enclosure.
  • UL864 9th edition Sole Path approved fire alarm communicator
  • Works with any FACP that communicates in Contact ID or 4/2 format
  • Powered from control panel, 12-24VDC (71mA standby, 200mA transmit)
Item#:
SLE-LTEV-FIRE
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Commercial Fire/Burg, LTE Alarm Communicator Red Metal Enclosure

This item has been discontinued and replaced by item 
  • Commercial Fire Dual Path, LTE Alarm Communicator
  • Red Metal Enclosure
  • Powered by Control Panel
  • Input: 12-24VDC (100mA @ 24VDC w/peak RF transmission draw of 200mA).
Includes:
  • (4) Programmable EOLR Zone inputs for connection to legacy FACPs
  • (2) Form C relay outputs, eliminating the need for additional listed supervision relay.
  • (2) Modular RJ45 Telco jacks for easy connection to FACP.
Agency Compliance:
  • UL985 Household Fire Warning System
  • UL864 10th Edition Control Units For Fire Alarm Systems
Item#:
SLE-LTEVI-CFB
You must be logged in to order this item. Log in here
PowerSeries Neo is Security Redefined
PowerSeries Neo by DSC redefines intrusion security by combining the flexibility of a modular, hardwired system with the simplicity of a wide range of wireless devices and peripherals, resulting in the most comprehensive hybrid system available in the market today.

This brand new and exceptionally flexible platform leverages the superior capabilities of PowerG - the industry's leading-edge wireless intrusion technology. Innovative alarm verification solutions, together with an exceptionally comprehensive remote service software suite, make PowerSeries Neo the ideal first-class solution for residential and scalable commercial installations.


TL880LE / TL880LT LTE/Internet Dual-Path Alarm Communicator
The TL880LE / TL880LT LTE/ Internet Dual-Path Alarm Communicator ensures reliable primary or back up alarm communication of the phone line for your home or business. When connected to a DSC HS2016/ HS2032/ HS2064 or HS2128 control panel, alarm reporting paths can be combined through the Public Switched Telephone Network (PSTN), if so desired, plus the LTE cellular network and/or Internet for maximum redundancy.

This communicator uses the LTE cellular network to ensure high speed, reliable and secure alarm communications to alleviate any concerns about the possibility of phone line disruption, or as a primary communicator in locations where there is no traditional phone line. Internet and LTE in the same module mean that as the industry moves away from traditional phone lines, customers can continue to rely on redundant transmission methods.

As more and more homes or businesses move away from traditional phone lines, towards VoIP (Voice over IP) or mobile phones, alternate delivery methods for alarm communication must be explored for security systems. The TL880LE / TL880LT LTE/Internet Dual-Path Alarm Communicator is an ideal solution for both residential and small-to-medium business environments.

Main Features
  • Back up and primary alarm communication
  • Panel remote uploading/downloading support via Cellular/Internet
  • Alarm.com Signal Forwarding or UL/ ULC Pass-through reporting modes available
  • SIA and Contact ID protocol
  • Includes AT&T or Verizon LTE SIM card
  • Easy activation process through Alarm.com dealer portal
  • Local signal strength and trouble indicators in addition to Alarm.com AirFX remote diagnostics and programming
  • Can be located with alarm panel, or mounted remotely up to 100' away using PCL-422 module
  • Visual Verification events can be reported to central station and viewed in the Alarm.com mobile app
  • Includes Z-Wave Plus and Image Sensor capability to enable Smart Home features
General Information
Name: DSC TL880LECVZ N TL880LE Series PowerSeries Neo/Pro LTE/Internet Dual-Path Alarm Communicator, Verizon, Johnson Controls, DSC
Category: DSC, Intrusion, Alarm Communicators & Equipment, Alarm Communicators
UPC Code: 820043016048
Item#:
TL880LECVZ N
You must be logged in to order this item. Log in here
FEATURES
™ Supports 12V and 24V FACPs
™ Sole path cellular, IP, or dual-path communications
™ CAT-M1 cellular is 5G-ready
™ Supports Contact ID reporting format
™ Trouble event detection and reporting
™ Four programmable input/outputs
™ Alarm capture via phone line interface or standard alarm outputs
™ UL certified for usage in commercial applications
™ At-a-glance system status via front panel LEDs 
Item#:
BAT-FIRE-A
You must be logged in to order this item. Log in here
|◀ 13 - 24 of 60 ▶|
View:
(Denotes required field.)