|◀ 1 - 12 of 425 ▶|
View:

The DTK-2MHLP24B provides surge protection for two 24V alarm system loop circuits in a field-replaceable module. With required snap-track bases, protect up to 10 pairs with a common ground.

  • Protects two 24V pairs per module
  • Multi-stage SAD technology provides the best possible protection
  • Field-replaceable modular edge card connection with single point ground for fast installation
Item#:
DTK-2MHLP24B
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The DTK-120HWLOK Surge Protective Device (SPD) with NFPA 72 2013 10.6.5.2 compatible lockout kit protects 120VAC equipment panels and dedicated branch circuits while preventing accidental alarm disconnect.

  • Approved for 20A circuit breakers
  • SCCR rating of 10kAIC complies with NEC Article 285.6
  • NEMA 4X weatherproof enclosure allows for use in harsh environments
  • Lockout kit prevents accidental disconnect of fire alarm system
  • UL1449 4th Edition Type 1 SPD
  • Diagnostic LED

Item#:
DTK-120HWLOK
You must be logged in to order this item. Log in here

The DTK-120HW provides surge protection for 120VAC equipment panels and dedicated branch circuits. The compact, parallel-mount design allows for installation in a variety of locations.

  • Approved for 20A circuit breakers
  • SCCR rating of 10kAIC complies with NEC Article 285.6
  • NEMA 4X weatherproof enclosure allows for use in harsh environments
  • UL1449 4th Edition Type 1 SPD
  • Diagnostic LED
Item#:
DTK-120HW
You must be logged in to order this item. Log in here

DITEK's DTK-4LCLPCR provides surge protection for card readers operating on 12/24V power. Protects four pairs of power/data connections.

  • Protects power, LED and data lines
  • Single point ground for all protected circuits
  • Series connection, parallel function adds no resistance to loop circuits

Item#:
DTK-4LVLPCR
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

DITEKs DTK-MRJPOES is designed with state-of-theart circuitry to provide superior protection for Shielded 10GbE Power over Ethernet connections. This point of use surge protector can be installed at the equipment end, or ahead of injectors and midspan devices.

  • Uses SAD and GDT technologies for superior protection
  • Data speeds up to 10GbE without signal degradation
  • PoE Plus, HiPoE ready for high-wattage applications
  • When used with STP cable, device does not require a separate earth ground

Item#:
DTK-MRJPOES
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

DITEK's DTK-1F is a single outlet surge protector that provides AC power protection for alarm panel transformers and point of use appliances.

  • Single AC outlet protects critical equipment
  • Center screw secures to outlet and can also secure a connected transformer
  • Diagnostic LED indicates AC power, ground presence and suppressor function

Item#:
DTK-1F
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 425 ▶|
View:
(Denotes required field.)