|◀ ◀ 1 - 12 of 10987 ▶ ▶|
View:

Mortise Cylinder for MK Series - Keyed Alike

Item#:
MKC-KA
You must be logged in to order this item. Log in here

4-7/8" Strike, Centerline, Fo r Rim Panics, Indoor/Outdoor R

Item#:
EN400RP-12DC-32D-RH
You must be logged in to order this item. Log in here

Quiet Duo LR100JAK 24V Latch Retraction Dogging Kit

The SDC LR100 Series Electric Latch Retraction Kit enables electric access control and dogging of mechanical exit devices. When energized the motor retracts the exit device latch and pulls the pushpad on most devices into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.
  • Motorized Electric Latch Retraction & Dogging for Fire Rated & Non Fire Rated Devices
  • Retrofits select exit device brands without removing device from the Door
  • Only Latch head cover and end cover plate removable required for most other brands
  • Low 700mA Inrush, 200 mA Continous
Item#:
LR100JAK
You must be logged in to order this item. Log in here

Magnetic Door Holder - Flush-Mount, UL

The UL Listed SECO-LARM Magnetic Door Holders are designed for virtually any remote door release applications, whether residential or commercial. Fail-safe operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.
  • For use with door closers to control the release and closing of residential, commercial, and public area doors
  • Adjustable armature plate reduces installation time and adjusts to door alignment changes
  • Low profile design
  • Holding force – 33-lb (15kg)
  • 3 voltages: 12/24 VAC/VDC, and 120VAC
  • Cast aluminum faceplate
  • No residual magnetism for easy release
  • Built-in voltage spike suppressor
  • Use with SECO-LARM door closers
  • Optional extension bars available: 1/2", 3/4", 1", 2", 3", 4", 5", 6", 7" (13mm, 19mm, 25mm, 50mm, 76mm, 102mm, 127mm, 152mm, 178mm)
Item#:
DH-171SQ
You must be logged in to order this item. Log in here

Gate Lock, 12/24VDC, Fail Locked Monitored

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

  • 2,000 lbs holding force
  • Operates under preload up to 100lbs
  • Automatic dual voltage - no field adjustment required
  • Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
  • Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
  • Tamper resistant cast housing
  • Optional latch status monitor
  • Surface mount
  • MagnaCare lifetime replacement, no fault warranty

Item#:
GL1-FLM
You must be logged in to order this item. Log in here

MAG LOCK 600LB SURFACE MOUNT door - basic

Item#:
CX-91S-06
You must be logged in to order this item. Log in here

Removable Mullion Wire Harness for 4800 Series Strikes

Item#:
MWH-5
You must be logged in to order this item. Log in here

M32 Magnalock - 12/24 VDC Satin Stainless Finish

600 lbs. holding force Magnalock with automatic dual voltage. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.

  • Patented instant release circuit - no residual magnetism
  • Surface mounts easily with a minimum of tools
  • Fully sealed electronics - tamper proof and weatherproof
  • Mounted using steel machine screws into blind finishing nuts
  • Architectural brushed stainless steel finish (US32D/630)
  • All ferrous metal surfaces plated to MIL specification
  • Hardware accessories available to configure any opening
  • Dress Covers available
  • Ten feet [3.05m] of jacketed, stranded conductor
  • Lock options include BondSTAT magnetic bond sensor and integrated door position switch
  • UL Listed
  • MagnaCare lifetime replacement, no fault warranty

Item#:
M32
You must be logged in to order this item. Log in here

Emergency Exit Button w/ 30 Sec. Timer - Narrow Stile, Green/Red

  • Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
  • Mounted next to door
  • Momentarily pressing the button releases door for 30 seconds
  • Retriggerable
  • Single Gang or Narrow Stile
  • SPST 3 Amp wet N/C contacts
  • Operates on 12 or 24 VDC (must be same voltage as the installed lock)
  • For indoor use only
  • EEB3N includes switchable green and red lenses
  • UL Listed

Item#:
EEB3N
You must be logged in to order this item. Log in here

GR 1 ANSI Strike,3/4" Throw,12 /24 AC/DC, Monitored c/w 3 F/P

Item#:
CX-ED1079DL
You must be logged in to order this item. Log in here

M32 Magnalock- 12/24 VDC, DPS Position Switch

Item#:
M32D
You must be logged in to order this item. Log in here

ANGLE BRACKET 600S/600L/600LB 1 X 1.5 CLEAR FINISH

Item#:
AM3320
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 10987 ▶ ▶|
View:
(Denotes required field.)