View:
Dahua’s DH-PFWB5-10n is 5 GHz CPE that delivers high-performance and stable operation. This product combines an advanced radio core containing MIMO 2 x 2 technology with an integrated, high-gain, dual polarization directional antenna. The feature-rich operating system is optimized for ultra-high performance wireless communications while optionally allowing compatibility with older 802.11a standard devices.
  • Integrated 5 GHz (2 x 2) MIMO Radio
  • Recommended for up to 3.11 miles (5 km) PTP/PTMP Wireless Connection (as a station in PTMP link)
  • Frequency 5.150 – 5.850 GHz  (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)
  • High-performance and Stable Operation
  • Improved Noise Immunity
  • TDMA for Reliable Communication
  • Dual Firmware
  • IP66 Ingress Protection
  • Built-in tools include: Site Survey, Link Test, Antenna Alignment, Spectrum Analyzer, Ping & Trace for Configuration and Debugging
Item#:
DH-PFWB5-10N
You must be logged in to order this item. Log in here
The ELK-IP232 is an Ethernet to RS-232 Serial Port Bridge. It may be used to connect any standard serial communications device such as a PC, an audio/video distribution system, etc., to an Ethernet network. It allows bi-directional communication between the two. It operates as both a network server and a client, which means it is able to both initiate and accept network connections. Once a network connection is made, the remote networked device or computer is virtually connected to the serial device on the other side of the Bridge. Both the network device and the serial device can send and receive messages to and from each other. Up to twelve network devices may be connected simultaneously. Data sent from any one of them is bridged to the serial port. Data received on the serial side is transmitted to all connected network devices. The bridge can send and receive both UDP and TCP packets.
  • Supports both UDP and TCP protocols
  • Allows up to twelve (12) simultaneous TCP-IP network connections 
  • Up to twelve (12) "Rules" may be programmed to make outgoing connections.
  • Outgoing connections may be initiated upon power up or when serial activity is detected. They may remain connected indefinitely or for a set time period.
  • Selectable baud rate from 300 to 115200 baud 
  • Supports software handshaking (XON/XOFF) and hardware handshaking (RTS/CTS) 
  • Multiple Bridges can be used on the same network 
  • Can be updated in the field with new firmware using the Configuration Utility 
  • Integrated 802.3 compliant 10/100 Mbit network interface 
  • RS232, DB9M 9-pin serial port connection 
  • Connects to the M1 RS-232 Serial port (Port 0). 
  • RJ45 8-pin Network Jack 
  • 2.1mm barrel type power connector (center positive) 
  • LED Indicators for Power, Link, and Data 
  • Operating Voltage: 12 Volts D.C. from ELK-P1216 Plug-in Power Supply ** 
  • Current Draw: approx. 135 mA 
  • Dimensions: 3.85. L x 1.7. W x 0.93. D 
Item#:
IP232
You must be logged in to order this item. Log in here
Dahua’s DH-PFWB5-90n is 5 GHz base station that delivers high-performance and stable operation. This product combines an advanced radio core containing MIMO 2 x 2 technology with an integrated, high-gain, dual polarization directional antenna. The feature-rich operating system is optimized for ultra-high performance wireless communications while optionally allowing compatibility with older 802.11a standard devices.
  • Integrated 5 GHz (2 x 2) MIMO Radio
  • Recommended as a Base Station for 3.11 miles (5 km) PTMP Wireless Connection
  • Frequency 5.150 – 5.850 GHz  (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)
  • High-performance and Stable Operation
  • Improved Noise Immunity
  • TDMA for Reliable Communication
  • Dual Firmware
  • IP66 Ingress Protection
  • Built-in tools include: Site Survey, Link Test, Antenna Alignment, Spectrum Analyzer, Ping & Trace for Configuration and Debugging
Item#:
DH-PFWB5-90N
You must be logged in to order this item. Log in here
  • Wireless N300 point-to-point networking (2.4 GHz)
  • 2 x preconfigured Wireless N access points
  • IPX6 outdoor weather rated housing
  • Built-in 10 dBi directional antenna
Item#:
TEW-740APBO2K
You must be logged in to order this item. Log in here
Alarm.com ADC-W110 PoE to Wi-Fi Bridge

The ADC-W110 makes it easy to install any Alarm.com Power over Ethernet (PoE) camera, eliminating the need to run cable wiring throughout a home or business.

Simply plug the device into a wall outlet to provide a PoE camera with both electrical power and secure, reliable Wi-Fi connectivity.

The ADC-W110 integrates with Alarm.com, providing easy post-installation troubleshooting and enhanced security.

Features

  • Simple plug-in installation
  • Secure, reliable Wi-Fi connectivity
  • Eliminate the need for wires

Item#:
ADC-W110
You must be logged in to order this item. Log in here
Item#:
HN-GHN-E000
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
View:
(Denotes required field.)