S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
High output, very low current draw, dual channel siren drivers. They are designed to work with alarm panels with limited current capability.
Features:
- 20 Watt Surface Mount Siren
- 4 Plastic Anchors
- 4 Screws
- 1 Plastic Housing Closure Screw
- Pre-Wired For Quick And Easy Installation
- Compact, Easy To Mount, Hardware Included
- Heavy duty magnet, Mylar cone
- UL Listed
- Lifetime Limited Warranty
- Operating Voltage: 12 Volts DC
- Sound Level: 108db @ 1 meter, 13.8vdc
- Current Draw: 500mA @ 13.8vdc
- Size: 4.25 x 4.25 x 2.13 inches (108mm x 108mm x 54mm)
- Color: White
The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, "No Rust" enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The stainless steel naturally reflects the mounting surface and blends easily with any residential or commercial building.
Features:
- Installer Friendly - Easy to Mount - Exterior / Interior use
- Sealed Reed Tamper Switches at single bolt closure and at rear of cabinet
- No Rust - No Mess
- Compact - Less Noticeable
- Loud - Rivals Sound of Larger Speakers
- Heavy Duty 1.8 lb Magnet
- High Fidelity Voice Coil
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 30 Watts Nominal / 50 Watts Peak
- Frequency Response: 500 to 7000 Hz
- Enclosure: #304 Stainless Steel with Stainless Hardware Included
- Size: 5 H x 5 W x 4 Inch D
- Tamper: Sealed Reed Switches
The ELK-SL1 is a weather resistant strobe light designed for easy attachment to ELK's stainless steel speaker and siren units. An optional wall kit (ELK-WK1) allows the strobe to be mounted to a wall or to single or double gang electrical boxes.
The attractive SL1 features simple 12 Volts DC two-wire hookup, low current draw, and compatibility with virtually all 12 volt control panels (including pulsing alarm outputs). The ELK-SL1 is molded from virtually indestructible polycarbonate, such as Lexan, and is available in clear, amber, blue, and red.
Includes:
- Strobe
- FiberWasher
- Hex Socket Cap Type 3 Screw
- 3/16 inch Short Arm Hex Key
- Blanking Plug
- 2 Gel Filled B-Connectors
- Instructions
- Indoor / Outdoor
- Durable Polycarbonate
- Easy to Install: Simple 2 Wire Hookup
- Works with pulsing alarm outputs
- Operating Voltage: 12 Volts DC
- Current Draw: 210mA
- Flash Rate: Approx. 1 Flash per second
- Size: 4.875 x 3.875 x 1.125 Inches
- Color: Clear, Red, Blue, or Amber
- Lifetime Limited Warranty
The ELK-SP30 is an interior multi-purposesurface mount speaker great for voice and sounds.
Features:
- Pre-Wired For Quick And Easy Installation
- Compact, Easy To Mount, Hardware Included
- Heavy duty magnet, Mylar cone
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 20 Watts Nominal
- Frequency Response: 250 to 8000 Hz
- Size: 4.25 in. x 4.25 in. x 2.13 in.(108mm x 108mm x 54mm)
- Color: White
The ELK-110 Voice "Talking" Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features three input channels (1 for Burglar, 1 for Fire, and 1 for Carbon Monoxide), bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.
Includes:
- ELK-110 Siren Driver
- Wiring Harness
- Double Sided Foam Mounting Tape
- Instructions
- Installer Friendly - Compact & Easy to Mount
- Three Input Channels, Burglar, Fire, and Carbon Monoxide
- Bilingual Voice - English and or Spanish, Siren Only, Speech Only, or Combined
- MilliMiser Lowers Current Draw
- ComboTrigger For Single Outputs
- VolumeStep Slowly Increases Siren Volume
- Temporal 3 Coded Fire Signal
- Temporal 4 Coded CO Signal
- Lifetime Limited Warranty
- Operating Voltage: 10 to 14 Volts DC
- Current Draw: 1.25 Amps, (800 mA on MilliMiser setting), with one 8 Ohm speaker
- Sound Level: 122 db @ 1 meter, 14 vdc, with one 8 Ohm speaker
- Max. Speaker Load: 4 Ohms
- Size: 2.75in x 4.0in (70mm x 102mm)
The ELK-100 Siren Driver is a great choice for residential and commercial security installations. It draws less current than most siren drivers, and offers two volume levels (example: one indoor, the other outdoor) simultaneously. Our exclusive MilliMiser option allows further reduction of current draw for controls that have limited alarm or auxiliary output power. The ELK-100 has two inputs, Yelp & Steady. The Steady sound overrides the Yelp. The Yelp input has our unique ComboTrigger feature, especially designed for controls that have a single alarm output with a pulsing option for fire or burglary. When pulsed, this channel produces a distinctive third sound pattern.
Includes:
- ELK-100 Siren Driver
- Double Sided Foam Mounting Tape
- Instructions
- Two Volume Levels Simultaneously
- Draws Less Current Than Most Sirens
- MilliMiser Lowers Current Draw
- Economical - Drives Multiple Speakers
- ComboTrigger For Single Outputs
- Pre-Wired for easy Installation
- Lifetime Limited Warranty
- Operating Voltage: 6 to 14 Volts DC
- Current Draw: 1.2 Amps, (700 mA on MilliMiser setting), with one 8 ohm speaker
- Sound Level: 120 db @ 1 meter, 14 vdc, with one 8 ohm speaker
- Max. Speaker Loading: 4 Ohms
- Size: 2.75in X 3.6in (70mm X 91mm)