View:

  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter/Amseco, Faraday, Gentex®, System Sensor®, and CooperWheelock®.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision steered to input 1 or input 2.
  • Signal circuit trouble memory (helps identify intermittent loop problems).
  • Common trouble input and output.
  • Ground fault detection.
  • Unit includes power supply, red enclosure, cam lock, and battery leads.
Item#:
AL1002ULADA
You must be logged in to order this item. Log in here

  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter/Amseco, Faraday, Gentex®, System Sensor®, and CooperWheelock®.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision steered to input 1 or input 2.
  • Signal circuit trouble memory (helps identify intermittent loop problems).
  • Common trouble input and output.
  • Ground fault detection.
  • Unit includes power supply, red enclosure, cam lock, and battery leads.
Item#:
AL802ULADA
You must be logged in to order this item. Log in here

  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter/Amseco, Faraday, Gentex®, System Sensor®, and CooperWheelock®.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision directed to input 1 or input 2.
  • Signal Circuit Trouble Memory - facilitates quick identification of an intermittent/fault (short circuit, open or ground) which has previously occurred on one or more signaling circuit outputs. LEDs indicate/identify which output the fault has occurred.
  • Common trouble input and output.
  • Ground fault detection.
  • Unit includes power supply, logic board enclosure, cam lock, and battery leads.
Item#:
AL1042ULADA
You must be logged in to order this item. Log in here

  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter/Amseco, Faraday, Gentex®, System Sensor®, and CooperWheelock®.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision steered to input 1 or input 2.
  • Signal circuit trouble memory (helps identify intermittent loop problems).
  • Common trouble input and output for external trouble signals tie-in.
  • Ground fault detection.
  • Unit includes power supply, red enclosure, cam lock, and battery leads.
Item#:
AL602ULADA
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Remote 4-output NAC Extender, for 6.5A ttl, or 2A, max. on any 1 output. Red 14 x 16" can, connects to 120VAC, supports 24V 16Ah standby batts.  Supervised, fire bus connection. System Sensor and Wheelock NAC sync. (5/system, for 20 add’l NAC circuits ttl.). 3 Programmable relay outputs;  2 low voltage; 1 high-voltage 120V rated relay.
Item#:
GEMC-NAC7S
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • 10 Amp Power Supply
  • 3 Amps, regulated per NAC
  • 6 NACs Class B or 3 NACs Class A
  • 2 dry contact inputs
  • Fully programmable and monitored through control panel
  • Isolated P-Link repeater connection, Class A or B
  • Up to 31 power supplies per control panel with system wide sync
  • Quadrasync feature synchronizes strobes from Potter/AMSECO, Gentex, Cooper-Wheelock and System Sensor.
  • Compatible with all Potter PFC-6000 series fire alarm control panels

Item#:
3992662
You must be logged in to order this item. Log in here

  • No special wiring for SLC or P-Link connection
  • SLC Class A, X or B capable
  • Mounts with included stacker bracket
  • May mount in panel, accessory cabinet, or PSN-1000/E Power Supply
  • Product includes a 5 year warranty
  • UUKL Listed for Smoke Control

Item#:
3992722
You must be logged in to order this item. Log in here

  • Programmable LCD display interface.
  • EOL resistor value is programmable by output.
  • Ethernet port interface for remote programmability and monitoring.
  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter, Gentex®, System Sensor® , and CooperWheelock®.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision directed to input 1 or input 2.
  • Common trouble Dry N.C. output for reporting trouble to remote FACP.
  • Ground fault detection - Ground fault maximum test impedance 1,000 ohm.
  • Ground fault Dry N.O. output to report ground fault to remote FACP.
  • CO Temporal Code 4 (NFPA720) include Gentex® , Potter and System Sensor® devices
Item#:
FIRESWITCH108
You must be logged in to order this item. Log in here
  • 120/240 VAC 50-60 Hz input
  • 5.1 Amps @ 120 VAC or 2.5 Amps @ 240 VAC
  • Battery Standby Current 75 mA
  • Alarm Standby Current 75 mA (no external load)
  • Terminals support 12 - 18 AWG wire
Item#:
PSN-106
You must be logged in to order this item. Log in here
View:
(Denotes required field.)