|◀ 1 - 12 of 828 ▶|
View:

The DTK-120HWLOK Surge Protective Device (SPD) with NFPA 72 2013 10.6.5.2 compatible lockout kit protects 120VAC equipment panels and dedicated branch circuits while preventing accidental alarm disconnect.

  • Approved for 20A circuit breakers
  • SCCR rating of 10kAIC complies with NEC Article 285.6
  • NEMA 4X weatherproof enclosure allows for use in harsh environments
  • Lockout kit prevents accidental disconnect of fire alarm system
  • UL1449 4th Edition Type 1 SPD
  • Diagnostic LED

Item#:
DTK-120HWLOK
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Sav182D Power Supply provides 12VDC distributed via eighteen (18) Class 2 Rated PTC protected power limited outputs for powering surveillance cameras.

  • Power LEDs.
  • Field installable 3-wire line cord with integral strain relief.
  • Unit maintains camera synchronization.
  • Ease of installation saves time & eliminates costly labor.

Item#:
SAV182D
You must be logged in to order this item. Log in here

The DTK-PVP27B provides surge protection for fixed analog and HDCCTV cameras running on coax cabling. Each device protects 12/24V power, and video conductors.

  • Multi-stage SAD technology provides with best possible protection
  • 5 Amp, 12/24V circuit protects power feeds to camera, heater, blower or defroster
  • Single point gorund inproves protection and speeds installation

Item#:
DTK-PVP27B
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
BATCR123ASINGLE
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

eBridge100RMT Ethernet over Coax/CAT5e Adapter Kits transmit full duplex data at 100mbps and pass PoE compliant power over coax 304m, or CAT5e cable up to 500m without repeaters. The adapter kit consists of an eBridge100RM receiver and an eBridge100TM transceiver. These adapters, along with the connected IP camera or edge device, is powered by virtually any midspan or endspan. Remote management functions such as edge device reset, monitoring real-time current draw and port status are possible when coupled with an Altronix NetWay8M/16M Midspan. eBridge100RMT is compatible with Megapixel, HD720, HD1080 and VGA cameras.

Item#:
EBRIDGE100RMT
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 828 ▶|
View:
(Denotes required field.)