|◀ ◀ 37 - 48 of 718 ▶ ▶|
View:

12/24V,6.0A SUPVS PS LG CAB r 24VDC @ 6 amp, AC & battery

Item#:
SMP7PMCTX
 
Spec Sheet
You must be logged in to order this item. Log in here

700060/LS14500 AA LITHIUM Battery

Item#:
700060/LS14500
You must be logged in to order this item. Log in here

Replacement Battery Pack

The console battery pack can be purchased separately for use with a GC2 Panel to extend battery life or to use as a replacement battery.

Features:

  • Optional extra capacity battery
  • Replaces standard internal Control Panel battery
  • Required for UL985 fire warning system listing
  • Nickel metal hydride (NiMH) battery

Item#:
2GIG-BATT2X
You must be logged in to order this item. Log in here

16 VAC 100VA OPEN FRAME XFMRat .25 amp), 115VAC input

Altronix T16100 open frame transformer provides power for electronic power supplies and equipment including security, access control, and surveillance devices.

Input: 115VAC 50/60 Hz, 1A

Output: 16VAC/100VA (6.25A) supply current

Item#:
T16100
 
Spec Sheet
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

SMP3E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5A continuous supply current. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.
  • Power supply/charger with enclosure.
  • Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries.

Specifications:
Input:
  • 6VDC or 12VDC output use TP1640 or 24VDC output use T2428100.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3E
 
Spec Sheet
You must be logged in to order this item. Log in here

GC3 Replacement Battery

Item#:
2GIG-BATTERY-GC3
You must be logged in to order this item. Log in here

24VAC/7.25A, 28VAC/6.25A XFMR 5 amp) or 28VAC/175VA (6 amp),

Altronix T2428175 open frame transformer provides power for electronic power supplies and equipment including security, access control, and surveillance devices.

Input: 115VAC 50/60 Hz, 1.6A
Output: 24VAC/175VA (7.25A) or 28VAC/185VA (6.25A) supply current

Item#:
T2428175
 
Spec Sheet
You must be logged in to order this item. Log in here

Low Battery Cutoff & Master Power Switch

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:

  • 1 Low Battery Cutoff & Master Power Switch
  • 2 pieces of Double Sided Tape
  • Instructions
Features:
  • Works With Any 12 Volt Control Panel
  • Automatic Low Battery Cutoff Protects Battery From Deep Discharge
  • AC and Battery On / Off Power Switch
  • Visual LED Power Indicator
  • Installer Friendly - Small Compact Size
  • Includes AC Wires & Battery Leads
  • Fits Standard Snap Track
  • Includes Double Sided Mounting Tape
  • Lifetime Limited Warranty
Specifications:
  • Relay Contacts: Form "C", 7 Amp @ 28 VDC
  • On / Off Power Switch: DPDT Slide Type
  • AC Power Leads: 18 AWG, 18" Length
  • Maximum Transformer Size: 18 VAC
  • Battery Leads: 18 AWG, 18" Length
  • Low Battery Cutoff Voltage: ~ 10 VDC
  • Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
Item#:
965
 
Spec Sheet
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 24/28VAC, Board

Altronix SMP3 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Track compatible (order Altronix model number ST3)

Specifications:
Input:
  • 16VAC to 28VAC.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3
 
Spec Sheet
You must be logged in to order this item. Log in here

24VAC or 28VAC 100Va Xfmr mp) or 28VAC/100VA (3.5 amp),

Altronix T2428100 open frame transformer provides power for electronic power supplies and equipment including security, access control, and surveillance devices.

Input: 115VAC 50/60 Hz, 1
Output: 24VAC/100VA (4A) or 28VAC/100VA (3.5A) supply current.

Item#:
T2428100
 
Spec Sheet
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 12/24VDC @ 2.5A, 115/220VAC

SMP3PMCTX supervised power supply/charger will convert a 115VAC/230VAC, 50/60Hz input, into a regulated 12VDC or 24VDC output @ 2.5A continuous supply current.

Specifications:
Input:

  • Input 115VAC, 50/60Hz, 0.65A or 230VAC, 50/60Hz, 0.35A.
Output:
  • 12VDC or 24VDC selectable output.
  • 2.5A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Supervision:
  • AC fail supervision (form C contacts).
  • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating 0° C to 49° C (32° F to 120° F).
  • Storage - 20° C to 70°C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 115VAC: 74.75VA.
    • 230VAC: 80.5VA.

Item#:
SMP3PMCTX
 
Spec Sheet
You must be logged in to order this item. Log in here

24VDC,10A Cab PS 10 amp, encl. 15.5 H x 12 W x

Item#:
SMP10C24X
 
Spec Sheet
You must be logged in to order this item. Log in here
|◀ ◀ 37 - 48 of 718 ▶ ▶|
View:
(Denotes required field.)