|◀ 25 - 36 of 98 ▶|
View:
  • For monitoring a driveway or use as an entrance indicator
  • No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker
  • Weatherproof IR photoelectric beam sensor for outdoor use
  • Speaker makes "ding-dong" or siren sound if beam is interrupted
  • Speaker volume can be adjusted or turned off
  • When in siren mode, sounding time is adjustable from 3~30 seconds
  • Connect additional speakers to the sensor wirelessly (one speaker included)
  • Includes the following:
    • Weatherproof wireless reflective sensor (Tx)
    • Wireless speaker (Rx)
    • Reflector
    • Two power adapters
    • Three mounting brackets: One each for the sensor, reflector, and speaker
Item#:
E-931CS22RFCQ
You must be logged in to order this item. Log in here
  • For outdoors gates, garage doors, etc.
  • Adjustable sensing range
  • 12~240 VDC / 24~240 VAC Operation
  • Current draw: Up to 40mA@12VDC
  • For indoor or outdoor use (IP66)
  • Pre-wired 6.5ft (2m) cord
  • Brackets and mounting hardware included
  • Compact size
  • New single-gang box and wall-mount brackets available
Item#:
E-931-S35RRQ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The AX-200TF short range photoelectric detector is compact in design with selectable beam frequencies. The selectable beam frequencies can be used to avoid unwanted crosstalk that can occur when using multiple photobeams over long distances or for beam stacking applications. The AX-200TF also carries the IP65 high durable structure, which prevents water, dust or bugs from getting into the unit. The ideal optical pitch design reduces false alarms due to accidental beam interruption by falling leaves, birds, and so on. These features deliver performance with higher reliability in severe outdoor environmental condition.
Replacment Lens (Covers) Optex part number is AX-TN/TFCOVER. (Sold Individually)

Features:

  • Selectable 4 channel beam frequencies
  • Four step alarm indicator LED
  • Environmental disqualification circuit
  • IP65 structure
  • Lightning and surge protection
  • Anti-frost hood cover
  • 99% beam blocking stability
  • A.G.C circuit
  • Adjustable beam interruption time

Item#:
AX-200TF
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • For outdoor gates, garage doors, etc.
  • Weatherproof (IP55) construction for indoor/outdoor use
  • Anti-condensation housing
  • Dual-color LED alignment system
  • Form C relay: 500mA@30VAC/VDC
  • Tamper switch: N.C. 500mA@30VAC/VDC
  • 31/4 in. (82mm) Round reflector included
  • Compact size
  • Monitored output: N.C., 10k Resistor

Item#:
SECO-E-931-S50RRGQ
You must be logged in to order this item. Log in here
  • Range: 45ft (14m)
  • Weatherproof (IP66) construction for indoor/outdoor use
  • Pre-wired 6ft (1.8m) cord
  • Bracket and mounting hardware included for both sensor and reflector
  • Adjustable sensing range
  • Compact size
  • Monitoring method: N.C., 10kΩ resistor
Item#:
E-936-S45RRGQ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 25 - 36 of 98 ▶|
View:
(Denotes required field.)