Altronix AL175ULX is a Two (2) Output Switching Power Supply/Charger that converts a 115VAC 60Hz input, into two (2) individually PTC protected 12VDC or 24VDC outputs.

Input

• Input 115VAC, 60Hz, 0.6A.
• Access control trigger input.

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings. The ELK-950 is compact and easy to install and features high quality, clearly labeled screw terminals, 8 pin modular phone connector, built-in tamper loop, and automatic shorting pins for cord removal.

• Superior Solid State Surge Suppression
• Rapid Response Time
• Protects Incoming Telephone Line
• Protects AC Input from Transformer
• Clamps Line-To-Line & Line-To-Ground
• Self-restoring After Surges Within Ratings
• RJ31/38X 8-Pin Modular Jacks
• Convenient Test points for Lineman's Test set
• Surface Mount Enclosure
• Screw Terminals Provided For Telco In-Out & AC Power
• Lifetime Limited Warranty
• Response Time: Less than 1 Nanosecond
• Breakover Voltage: 300 Volts on Telephone Line, 50 Volts on AC line
• Peak Pulse Current: 100 Amps
• Max AC Input Voltage: 24VAC
• Ground Wire: 24" - 14 Gauge Stranded
• FCC Reg. No. 5K6USA-23140-XP-N Ren No. 0.0B
• Size: 4.4" x 3" x 1.15"

Trove2 enclosure with TKH2 Altronix/Kantech backplane:

• Backplane accommodates a combination of Altronix and Kantech boards: Kantech: up to (3) KT-400, up to (4) KT-300, up to (4) KT-MOD-INP16 or KT-MOD-OUTP16, Altronix Power Supplies, Altronix T1618300 Transformer, Altronix Sub-Assemblies
• Includes Altronix Trove2 Enclosure and one (1) removable TKH2 backplane

Altronix T1618300K open frame transformer kit provides power for electronic power supplies and equipment including security, access control, and surveillance devices. It includes T1618300 transformer and mounting hardware for TKH2 backplane.

• Input:
  • 115VAC 50/60 Hz, 2.7A.
• Output:
  • 16VAC/300VA (18.7A) or 18VAC/300VA (16.7A) supply current.

Strikelt2 operates one (1) 24VDC panic hardware device. It is designed to handle the high current surge panic hardware locking devices demand. In addition, an auxiliary power output provides power for accessory devices such as card readers, keypads, REX PIRs, electronic timers, relays, etc.

Input

• 115VAC 60Hz, 7A.
• One (1) N/O trigger input.