1200 lbs Single Door Magnetic Lock, 12 or 24 VDC, US 40 Duranodic Finish, UL 10C and Canadian UL Listed

Features

• Instant release, no hysteresis
• Can be used with any access control system
• Self drilling TEC screws
• Built-in arc suppression
• E-Z mount system, no special tools required
• Non-aluminum parts are plated to resist corrosion
• Limited lifetime warranty
• Duranodic Finish

• Bracket mounting provides the easiest install for out-swing doors
• Innovative install template for an effortlessly accurate alignment between magnet and armature plate
• Sleek, low profile and refined lines for improved aesthetics
• LED visual locked status with configurable red/green color output
• BondSTAT lock bond sensor - Patented
• Integrated door position switch
• Autosensing dual voltage with microprocessor technology
• Adjustable automatic relock timer (0.5 - 15 seconds)
• Wire chamber with anti-tamper switch
• Efficient, low power usage
• Size optimized for use with door closers
• MagnaCare lifetime replacement, no fault warranty

The Surface MiniMag locks are designed with a 1-7/8 in. width to keep undersized openings within code. These locks are ideal solutions for traffic control on narrow-style interior or perimeter doors. The RCI 8371 Surface MiniMag® is for single outswinging doors. The RCI 8372 Surface MiniMag® is used for double outswinging doors without mullions. These electromagnetic locks install perfectly alongside most automatic door operators or stop-mounted door hardware. They reduce installation time and eliminate the need for extra brackets.

• Energy: 520mA Field-Selectable 12/24VDC (Max at 12VDC for 8371, 1.04A for 8372)
• Strength: Up to 750lbf Holding Force
• Warranty: Lifetime Limited Warranty
• Mode: Fail-Safe
• Fire-Rated: CAN/ULC S104 UL 10C 1-Hour
• Monitoring: Optional Door Status Sensor (DSS)/ Security Condition Sensor (SCS) Available

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

• 2,000 lbs holding force
• Operates under preload up to 100lbs
• Automatic dual voltage - no field adjustment required
• Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
• Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
• Tamper resistant cast housing
• Optional latch status monitor
• Surface mount
• MagnaCare lifetime replacement, no fault warranty

• Surface mount installation
• Power requirements: 12/24VDC
• Current Draw: 500mA @ 12VDC, 250mA @ 24VDC
• Monitoring sensor
• Visual feedback (red & green)
• Dimensions: 10.5 X 2.9 X 1.6 in. (265 x 73 x 40mm)