|◀ ◀ 13 - 24 of 718 ▶ ▶|
View:

75V, 2 Pair, Hybrid Field Repl aceable Suppression Module

Item#:
DTK-2MHLP75B
You must be logged in to order this item. Log in here

TVSS 120VAC 54KA Series In NEM A 4 Enclosure W/Dry Contacts

  • Protects 120VAC power with dry contacts for remote monitoring of surge protection status
  • Series design for fast response and best protection
  • Installed in a NEMA 4X enclosure
Item#:
DTK-TSS4D
 
Spec Sheet
You must be logged in to order this item. Log in here

12V, 2 Pair, Hybrid Field Repl aceable Suppression Module

Item#:
DTK-2MHLP12B
You must be logged in to order this item. Log in here

Power Distribution to 9 Devices (250mA ea)

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a single Master Power On/Off Switch. The modules accept a 6 to 30 Volt A.C. or D.C. power source (not included) which connects either to the input terminal block or the 2.1mm D.C. power jack located on the module. Two or more outputs can be paralleled for additional current.
  • Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
  • Master Power On/Off Switch.
  • Visual LED Power Indicators on each Output.
  • Convenient Test Points for measuring Total Current Draw.
  • Lifetime Limited Warranty.
  • Paintable White Plastic
  • Max Current Draw: 250mA from each output.
  • Max Combined Current Draw: Not to exceed Input Power Source
  • Input/Output Voltage: 6 to 30 Volts AC or DC
  • Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack
  • Output Connection: Screw terminals (POS and NEG) for each output
  • Enclosure Size: 6.5" x 4.3" x 2"
Item#:
PD9
 
Spec Sheet
You must be logged in to order this item. Log in here

RELAY MODULE 6/12V, DPDT 5 AMP peration, 120mA current draw,

RB5 relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.
Input Voltage

  • 6VDC or 12VDC operation.
  • Current draw: 120mA.
Contact Rating
  • 5A/220VAC or 28VDC DPDT contacts.
Item#:
RB5
 
Spec Sheet
You must be logged in to order this item. Log in here

120/240 VAC Split Phase, 3W(+G ), 100kA, SPD Type 1 & 2, UL14

Item#:
DTK-120/240HD2
You must be logged in to order this item. Log in here

Power Supply Charger, Single Class 2 Output, 12/24VDC @ 4A, 115VAC, Board

Altronix AL400ULXB2 UL Listed Sub-Assembly power supply/charger converts a 115VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.
This product replace AL4000ULXB

Specifications:
Input:

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output:
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision:
  • AC fail supervision (form C contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form C contacts).
  • Battery presence supervision (form C contacts).
Visual Indicators:
  • AC input, DC outputand Battery LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.):
      • 12VDC: 25 BTU/Hr.
      • 24VDC: 37 BTU/Hr.
  • System AC input VA requirement: 402.5VA.

Item#:
AL400ULXB2
 
Spec Sheet
You must be logged in to order this item. Log in here

Relay Module, 12/24VDC, DPDT Contacts @ 1A - 120VAC or 2A - 28VDC

RBSN relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

  • 12VDC or 24VDC operation.
  • Current draw: 15mA.
Contact Rating
  • 1A/120VAC or 2A/28VDC DPDT contacts.
Temperature
  • Operating -25ºC to 55ºC ( -13ºF to 131ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.
  • System AC input VA requirement:
  • 12VDC: 1.8VA.
  • 24VDC: 3.6VA.

Item#:
RBSN
 
Spec Sheet
You must be logged in to order this item. Log in here

4 Pair - 14V- Terminal Strip - 22-16 AWG

DITEK's LVLP surge protectors are used in multiple low voltage security applications. The DTK-4LVLPX protects four 12V hardwired signaling circuits.

  • Protects low voltage data and signaling loop circuits
  • Suitable for both AC and DC circuits
  • Series connection, parallel function adds no resistance to circuits

Item#:
DTK-4LVLPX
 
Spec Sheet
You must be logged in to order this item. Log in here

Remote Relay Module

Item#:
RM3008
You must be logged in to order this item. Log in here

Linear Power Supply Charger, Single Class 2 Output, 6/12/24VDC @ 1.2A

Altronix AL624 power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC output. This general purpose power supply has a wide range of applications for access control, security, and CCTV system accessories that require additional power.

Specifications:

  • Switch selectable 6VDC-12VDC-24VDC.
  • 6VDC or 12VDC @ 1.2 amp supply current or 24VDC @ .75 amp supply current.
  • Input 16VAC to 24VAC, 20VA to 40VA.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current 300mA.
  • Automatic switchover to stand-by battery when AC fails (zero voltage drop).
  • PTC battery protection.
  • AC input and DC output LEDs.
  • Extremely compact design.
  • Includes battery leads.

Item#:
AL624
 
Spec Sheet
You must be logged in to order this item. Log in here

2 Pair - 130V- Terminal Strip - 22-16 AWG

Item#:
DTK-2LVLPRUV
You must be logged in to order this item. Log in here
|◀ ◀ 13 - 24 of 718 ▶ ▶|
View:
(Denotes required field.)