S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
You must be logged in to order this item.
Log in here
Extended Remote Antenna Kit for use with cellular fire communicators, suitable for outdoor or indoor applications. Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 100' LMR 400 Coax Type N male to SMA male terminated cable, one (1) SMA female to TNC male adapter for use with competitive communicators. Also includes SLE-ANTEXT-ISO Commercial Fire Ground Fault Isolation Plate.
Item#:
SLE-ANTEXT100
You must be logged in to order this item.
Log in here
The Alula CONNECT-XT-A is a cellular AT&T LTE alarm
communicator designed for existing GE Interlogix Simon alarm panels.
The CONNECT-XT-A is part of the Alula Connect product family, this 4G
LTE and 5G cellular communicator quickly upgrades old Simon XT, XTi,
XTi-5 panels to the Alula interactive experience, adding complete
smartphone control for security, video and automation.
Most active Simon XT's are connected through a 3G cellular module installed in the back of the panel. These cellular cards from GE Interlogix and Alarm.com are currently outmoded, destined to go dark as the cellular carriers phase out their old networks. The Connect-XT is a universal, direct replacement for the 3G modules (and is 4G LTE and 5G-compatible) communicating alarm signals in any Simon panel (Simon XT firmware version 1.3 or later, Simon XTi, Simon XTi-5). Finally, you can save your existin Simon panel from the 3G radio communication sunset.
The Connect-XT-A is the most cost-effective solution to upgrade a Simon XT panel, deleting obsolete POTS lines and 3G cellular modules in a few minutes. It's so simple even homeowners can make the upgrade. Leaving the panel on the wall, Connect-XT-A is a tool-less repair. All functions of existing sensors and the Simon panel remain active. With the most current communicator technology in hand, DiYer's can extend the service life of any Simon XT security system while upgrading to interactive smartphone control.
Most active Simon XT's are connected through a 3G cellular module installed in the back of the panel. These cellular cards from GE Interlogix and Alarm.com are currently outmoded, destined to go dark as the cellular carriers phase out their old networks. The Connect-XT is a universal, direct replacement for the 3G modules (and is 4G LTE and 5G-compatible) communicating alarm signals in any Simon panel (Simon XT firmware version 1.3 or later, Simon XTi, Simon XTi-5). Finally, you can save your existin Simon panel from the 3G radio communication sunset.
The Connect-XT-A is the most cost-effective solution to upgrade a Simon XT panel, deleting obsolete POTS lines and 3G cellular modules in a few minutes. It's so simple even homeowners can make the upgrade. Leaving the panel on the wall, Connect-XT-A is a tool-less repair. All functions of existing sensors and the Simon panel remain active. With the most current communicator technology in hand, DiYer's can extend the service life of any Simon XT security system while upgrading to interactive smartphone control.
Product Features:
- AT&T Cellular LTE Compatible
- Upgrades Simon with Alula Interactive Control - one smartphone app for security, video and automation
- Video Integration - our powerful communicators can be combined with Alula video
- Z-Wave Automation (Not Included) - change a basic panel to a wireless smart home hub
- Simple Installation
- 4G LTE and 5G LTE Compatible - extended range and future-proof communications
- Remote Panel Programming
Item#:
CONNECT-XT-A
You must be logged in to order this item.
Log in here
PowerSeries Neo is Security Redefined
PowerSeries Neo by DSC redefines intrusion security by combining the flexibility of a modular, hardwired system with the simplicity of a wide range of wireless devices and peripherals, resulting in the most comprehensive hybrid system available in the market today.
This brand new and exceptionally flexible platform leverages the superior capabilities of PowerG - the industry's leading-edge wireless intrusion technology. Innovative alarm verification solutions, together with an exceptionally comprehensive remote service software suite, make PowerSeries Neo the ideal first-class solution for residential and scalable commercial installations.
TL880LE / TL880LT LTE/Internet Dual-Path Alarm Communicator
The TL880LE / TL880LT LTE/ Internet Dual-Path Alarm Communicator ensures reliable primary or back up alarm communication of the phone line for your home or business. When connected to a DSC HS2016/ HS2032/ HS2064 or HS2128 control panel, alarm reporting paths can be combined through the Public Switched Telephone Network (PSTN), if so desired, plus the LTE cellular network and/or Internet for maximum redundancy.
This communicator uses the LTE cellular network to ensure high speed, reliable and secure alarm communications to alleviate any concerns about the possibility of phone line disruption, or as a primary communicator in locations where there is no traditional phone line. Internet and LTE in the same module mean that as the industry moves away from traditional phone lines, customers can continue to rely on redundant transmission methods.
As more and more homes or businesses move away from traditional phone lines, towards VoIP (Voice over IP) or mobile phones, alternate delivery methods for alarm communication must be explored for security systems. The TL880LE / TL880LT LTE/Internet Dual-Path Alarm Communicator is an ideal solution for both residential and small-to-medium business environments.
Main Features
- Back up and primary alarm communication
- Panel remote uploading/downloading support via Cellular/Internet
- Alarm.com Signal Forwarding or UL/ ULC Pass-through reporting modes available
- SIA and Contact ID protocol
- Includes AT&T or Verizon LTE SIM card
- Easy activation process through Alarm.com dealer portal
- Local signal strength and trouble indicators in addition to Alarm.com AirFX remote diagnostics and programming
- Can be located with alarm panel, or mounted remotely up to 100' away using PCL-422 module
- Visual Verification events can be reported to central station and viewed in the Alarm.com mobile app
- Includes Z-Wave Plus and Image Sensor capability to enable Smart Home features
General Information
Name: DSC TL880LECVZ N TL880LE Series PowerSeries Neo/Pro LTE/Internet Dual-Path Alarm Communicator, Verizon, Johnson Controls, DSC
Category: DSC, Intrusion, Alarm Communicators & Equipment, Alarm Communicators
UPC Code: 820043016048
Item#:
TL880LECVZ N
You must be logged in to order this item.
Log in here
- Non-volatile memory, no batteries required
- Stores up to seven 32-digit phone numbers per input (fourteen 32-digit numbers total)
- 2 minutes of record time (1 minute per input)
- Programmable message repeat counter
- Programmable lap counter
- Two inputs programmable for normally open or normally closed and enabled or disabled
- Programmable ring delay for remote programming and alarm polling
- Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
- Programmable resume timer for each input (time following reset for input to become active again)
- Call progress detection
- Programmable ringback limit for call progress
- Remote security and access codes
- Local or remote programming and recording
- Compatible with the RC-2A and RC-3 remote DTMF controllers
- Phone numbers may be programmed as pager numbers (no voice message played)
- Programmable hookswitch flash before dialing
- Local reset input
- Local alarm state indication LED
Item#:
K-202-DVA
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
Box set includes all parts needed for 1 cashier/security window system
Inconspicuous units do not obscure faces of those approaching a ticket/customer window for added visibility and security
Flexible gooseneck microphone can be adjusted to virtually any position
Computer style headset can be used (not supplied by Aiphone)
Uses voice-actuated communication (VOX) system, requiring no additional operations during conversation
When the TALK switch is off, the operation unit is put on standby, but sound from public side is still heard at reduced volume
By linking the system to a motion sensor, communication mode is automatically activated when a customer is present
- Communication:
- Hands-free (VOX)
- Transmit output: 3W 4Ω
- Receive output: 1.5W 16Ω
- Wire Type:
- Speaker Driver to Control Unit: 2x2-cond., overall shield – use Aiphone #822202 or #821802
- Power Supply to Control Unit: 2-cond., overall shield – use Aiphone #8222202 or #821802
- Distance: Power Supply or Speaker Driver to Control Unit: 66' (22AWG/18AWG)
Item#:
IM-1
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)