S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The M1XSLZW is a specialized Elk-M1 serial expander for connecting an M1 Control to Z-Wave enabled devices through a Leviton VRC0P+3 Z-Wave Serial Interface. Z-Wave is a wireless, low power, "mesh" network technology widely used for automating devices such as: Lights, Thermostats, Electronic Locks, etc. Z-Wave empowers devices to be remotely controlled from across the room or across the world with benefits such as energy savings, convenience, and comfort.
The VRC0P+3 is known as a Z-Wave Secondary Controller. It must be included as a permanent member of the Z-Wave network as its job is to maintain contact with all Z-Wave devices. It communicates via RS232 to the M1XSLZW which translates the protocol into the M1 control. This allows commands to be sent and received on the Z-Wave network.
- Activity/Status LED (Orange)
- Auto-Reset Hardware Watchdog Circuit
- Addressable (1-7) TYPE 5 Databus ID
- Connection to VRC0P+3: DB9M 9 Pin Port
- Connection to M1: Elevator Screw Terminals (4)
- Operating Voltage: 12 Volts D.C.
- Current Draw: 31mA
- Housing: 4.25" x 6.375" x 2.125"
- Circuit Board: 2.25" x 3.95"
Item#:
M1XSLZW
You must be logged in to order this item.
Log in here
Use the Corner Kit to angle the Ring Video Doorbell towards a walkway, to improve motion detection and a better view of visitors.
- Comes with 3 stackable wedges
- Adjust viewing angle from 15°, 30° and 45°
- Paintable to match home
Item#:
RVD2 CORNER KIT
You must be logged in to order this item.
Log in here
Monitor high or low temperatures with this add-on remote sensor. Connects to any main zone on the M1 Gold (1-16) or M1EZ8 (1-8). Range is -50 to +140F. Applications include: freeze monitoring, second homes, agricultural uses, etc. Temperature may be accessed from keypad, telephone remote control, or rules.
- Measures Temperature From: -50 to +140 F
- Communicates to M1 Control Over 3 Wires
- Operates On Any Main Board Zone (1-16)
- Up to 16 Interfaces Allowed per M1 Control
- Interface May be Placed Up To 1000 ft From M1
- Suitable for Indoor/Outdoor Use in a Covered Environment
- Includes 7ft. Stainless Remote Probe
- Operating Voltage: 12 Volts D.C.
- Current Draw: 10mA
- Housing Dimensions: 2.375" x 1.25" x 1"
Item#:
M1ZTSR
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)