S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsTRENDnet’s TI-F10SC is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. It accommodates building-to-building or long distance networking with 100Base-FX Multi-Mode fiber over distances of up to 2 km (1.2 miles). Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.
- Hardened IP40 rated compact housing
- 100Base-FX Multi-Mode fiber over distances of up to 2 km (1.2 mi.)
- SC-type fiber port
- Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
- Overload current protection
- Includes DIN-rail and wall mounts
- Power supply sold separately (model TI-M6024)
Item#:
TI-F10SC
You must be logged in to order this item.
Log in here
The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS10 is compatible with Duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 10 kilometers (6.2 miles).
- Compliant with IEEE 802.3z Gigabit Ethernet
- ANSI Fiber Channel compliant
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Wide operating temperature range of -40°– 85 °C (-40° – 185 °F)
- Supports data rates of up to 1.25Gbps
- Transmission distance of up to 10km (6.2 miles)
- Low Electromagnetic Interference (EMI) design
- Supports 1310nm single-mode network transmissions
- Duplex LC optical interface
- Low power consumption
Item#:
TI-MGBS10
You must be logged in to order this item.
Log in here
Item#:
507332
You must be logged in to order this item.
Log in here
Item#:
151788
You must be logged in to order this item.
Log in here
Item#:
152259
You must be logged in to order this item.
Log in here
Item#:
SY-MGB-LA10
You must be logged in to order this item.
Log in here
The 10G-CAB-05 .5 Meter Fiber Cable w/SFP+ Modules is designed for use with Luxul managed switches that have 10 Gigabit stacking ports. It is .5M long and provides a cost-effective short run alternative to using more expensive fiber-based SFP+ modules. It offers a plug-and-play method for stacking two Luxul switches and when multiple 10G-CAB-05 are purchased, can be used to stack up to up to 16 Luxul switches.
- 10 Gigabit bi-directional performance
- Hot pluggable
- With integrated cable and modules, ready for immediate use (no termination required)
Item#:
10G-CAB-05
You must be logged in to order this item.
Log in here
The TFC-110S40D5i intelligent fiber converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that spans distances up to 40 km (24.9 miles). This module must be used with the TFC-110S40D3i module. Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX (SC Simplex Type) port.
- Must pair with TFC-110S40D3i
- Compliant with IEEE 802.3u 100Base-TX and 100Base-FX standards
- 1 x 10/100Base-TX RJ-45 port
- 1 x 100Base-FX single-mode bi-directional simplex-SC type fiber port
- Supports port level SNMP management
- Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management module TFC-1600MM and chassis TFC-1600
- Dip switch controls: Fiber (Full / Half-Duplex), UTP (Auto negotiation / Manual), Speed (10 Mbps / 100 Mbps),
- Copper (Full / Half-Duplex), LLR (Enable / Disable), and LLCF (Enabled / Disable)
- Link Loss Carry Forward (LLCF) support
- Link Loss Return (LLR) support
- Status LED indicators for Power and Link / Activity
- Removable metal enclosure
- Wall mountable
- Functions as a standalone converter or with the TFC-1600 fiber chassis
Item#:
TFC-110S40D5I
You must be logged in to order this item.
Log in here
The 10G-RJ45 is a 10 Gb SFP+ RJ-45 module designed for use with Luxul Ethernet switches that have an SFP+ port. This RJ-45 connector Small Form-Factor Pluggable+ (SFP+) module supports distances of up to 30m on standard CAT 6a/7 UTP copper cable for 10GBASE-T 10 Gigabit bi-directional connectivity to any device connected into the SFP+ slot of any compatible Luxul switch. It is provided particularly for connecting Luxul managed switches that have 10 Gigabit uplink/stacking ports.
- Supports links up to 30m using CAT 6a/7 cable
- Compliant with IEEE 802.3az
- Compliant with SFF-8431 and SFF-8432 MSA
- Low power consumption (2.5W max @ 30m)
- Auto-negotiates with other 10GBase-T PHYs
- Auto-sense MDI/MDIX
Item#:
10G-RJ45
You must be logged in to order this item.
Log in here
Mini-GBIC The TEG-MGBS40 Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. This SingleMode LC Type module spans distances up to 40km (24.9 miles) and includes 1 x 1000Mbps-LX ( LC-Type) Mini-GBIC connector.
- Compliant with IEEE 802.3z Gigabit Ethernet and Fiber Channel Standards
- Industry standard SFP package
- Duplex LC connector
- 1.0625Gbps Fiber Channel Compliant
- 1.25Gbps Gigabit Ethernet Compliant
- Single 3.3V Power Supply Voltage
Item#:
TEG-MGBS40
You must be logged in to order this item.
Log in here
The TFC-1000S40D5 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 40 km (24.85 miles). This module must be used with the TFC-1000S40D3 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port.
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
- 1 x 1000Base-T RJ-45 port
- 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
- Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
- Support LLR (link Loss Return) for FX port
- Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management module TFC-1600MM and chassis TFC-1600
- Status LED indicators for Power and Link / Activity
- Wall mountable
- Optional 19" system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
Item#:
TFC-1000S40D5
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)