• Converts between CAT5E/CAT6 and Coaxial Cable Transmission
• Long Distance Power Transmission Distances via Coaxial Cable
• Supports PoE Transmission, up to 1000 m (3280 ft)
• Supports the IEEE802.3 and IEEE802.3u Standards
• Supports MDI/MDX Self-adaptation

• Converts between CAT5E/CAT6 and Coaxial Cable Transmission
• Long Distance Power Transmission Distances via Coaxial Cable
• Supports PoE Transmission, up to 1000 m (3280 ft)
• Supports the IEEE802.3 and IEEE802.3u Standards
• Supports MDI/MDX Self-adaptation

Altronix P1MM are hot-pluggable SFP fiber transceiver modules and are readily usable with all Altronix Spectrum fiber optic equipment for 1G transmission rates. The P1MM is to be used with Multi-Mode Fiber for distances up to 550m. It is recommended to pair (two per fiber link) remote and headend with same SFP module.

• Features:
  • IEEE 802.3a compliant.
  • Spans distances up to 550m (1804 ft.)
  • Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA).
• Standards:
  • Class 1 FDA and IEC60825-1 Laser Safety Compliant.
  • Compliant with MSA SFP Specification.
• Connector Type:
  • LC Duplex.
• Data Rate:
  • Up to 1.25Gbps.
• Wave:
  • 850nm VCESL Laser Transmitter.
• TX power (dBm):
  • -18 ~ 0
• RX Sensitivity (dBm):
  • -8 ~ -4
• Distance:
  • 550m with 50/125 micron MMF.

The TEG-MGBSX Mini-GBIC Multi Mode module works with standard Mini-GBIC slots on most switches. This Multi-Mode LC Type module spans distances up to 550m (1,800ft).

• LC Duplex connector-type
• Spans distances up to 550 m (1800 ft.)
• Compatible with standard SFP slots

Altronix NetWaySP3X Indoor Ethernet over Fiber PoE+ Hardened Switches provide a 1Gb SFP port and three (3) PoE+ (30W) ports or up to two (2) Hi-PoE (60W) ports, passing data and power to PoE/PoE+ compliant devices. Cameras/edge devices may be located up to 100m from the unit. Features also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control, and report power and diagnostics from anywhere.

• Input: 115VAC, 60 Hz, 2.5A or 230VAC, 50/60 Hz, 1.3A.
• Power Output
  • Three (3) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
  • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
  • 120W total power.
  • Integral surge protection.
• Fiber Port
  • One (1) Gigabit SFP port.
  • Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).
• Ethernet
  • Three (3) 10/100/1000 Mbps ports.
  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair Cat-5 or better structured cable.
  • Distance: up to 100m.
  • Speed: 10/100/1000Mbps, half/full duplex, auto negotiation
• Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
• Indicators (LED)
  • Individual PoE On LEDs for each port.
  • Individual IP Link status, 10/100Base-T/active LEDs for each port.
  • ALOS LED indicates fiber connection for SFP port.
  • Heartbeat LED indicates proper operation of the unit.
• LINQ Technology
  • Remote network management allows for camera/device reset and monitoring.
  • Provides local and/or remote access to critical information via LAN/WAN.
  • Email and Windows Dashboard Alert notifications report real-time diagnostics.
  • Event log tracks history.