|◀ ◀ 1 - 12 of 370 ▶ ▶|
View:

PowerG 915Mhz Wireless PIR Motion Detector with Built-in Camera

When the PG9934P is armed and the PIR sensor detects movement, the detector activates the camera, sends an alert to the system and images are sent via ethernet or cellular to the monitoring station. The central monitoring station staff can then review the images to verify the alarm and respond accordingly. The PG9934P also operates in total darkness, making it a fundamental tool to deliver visual alarm verification.

With minimal installation time required, the PG9934P Wireless PIR Motion Detector with Integrated Camera reduces on-site time and increases productivity and revenue. The compact design, wireless capability and battery power of this detector offers home and business owners more installation choices, including locations where wiring is difficult or impossible.

Features:

  • Visual alarm verification in day and night
  • Full color, high-resolution images transmitted from the premises via Cellular or Ethernet
  • CMOS camera with IR illumination
  • Auto-setup for brightness and contrast via the control panel
  • Front cover and back tamper
  • Pet immune up to 85 lbs (38kg)
  • Dimensions: 125 x 63 x 60mm (4.9 x 2.5 x 2.4in)
Item#:
PG9934P
 
Spec Sheet
You must be logged in to order this item. Log in here

IQ Motion-S

The IQ Motion-S is an encrypted PIR that is as powerful as it is affordable. Leveraging our proprietary S-Line Technology it encrypts signals sent to the IQ panel while still providing support for legacy 319.5 systems. Pet immune up to 40 pounds, the IQ Motion-S is designed to mount on a flat surface or in a corner.
  • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  • Provides security coverage up to 30' in a large open area
  • Use to create rules such as "When someone enters the room, turn on light" or "Trigger alarm when intruder detected"
  • Pet immune up to 40 lbs
  • Code outputs: paring, tamper, tamper restore, alarm detect motion, alarm restore, supervisory, low battery
  • Transmitter frequency: 319.5MHZ +-15KHz
  • Transmitter bandwidth: 24KHZ
  • Modulation type: ASK-OOK
  • RF output power 91.1dBuV +/- 5% at 3m
  • Sensor Range 30 ft (9.1 m) x 40 ft (12.2 m)
  • Maximum Horizontal Sensing Angle 80°
  • Operating Temperature: -10C~50C
  • Relative Humidity: 5-95%
  • Non-Condensing Storage Temperature: -40C to 80C
Item#:
QS1231-840
 
Spec Sheet
You must be logged in to order this item. Log in here

Addressable Ceiling Passive Infrared Detector w/Tamper Switch

Item#:
AMB-500
 
Spec Sheet
You must be logged in to order this item. Log in here

PowerG Photoelectric Beam Detector

  • Aesthetically pleasing slim and compact design
  • Ideal for commercial applications and large residences
  • Market-leading perimeter detection using Active Infrared Technology (Photoelectric beams) and PowerG range
  • Transmitter is designed to send an infrared beam over long distances
  • Coverage area of 200 ft. with short range model PG9200AX 
  • Easy to install with view finder, alignment dials and LED indicators
  • Reliable performance with twin (PG9200AX)  beams
  • Cover and wall tamper protection
  • Extended battery life with PowerG
  • Polycarbonate cover protects the cover of the beams from UV rays and other harsh environmental conditions
  • IP55/IP65 dust-tight and waterproof rating ensures dependable operation even in extreme conditions
  • Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys IQ panels
Item#:
PG9200AX
 
User Manual
You must be logged in to order this item. Log in here

70 Ft. Outdoor Dual Beam

The AX-70TN short range photoelectric detector is compact in design with an IP65 highly durable structure. Rubber packing is used for all conceivable points where water, dust or bugs may penetrate, such as wiring holes, wire ports and the outer chassis. Preventing these factors helps deliver performance with higher reliability in severe outdoor environmental condition. In addition, the length between the upper and lower optics, and the width of the optics are ideally engineered to produce the most intelligent detection pattern which reduces false alarms by detecting human intruders only.
Replacment Lens (Covers) Optex part number is AX-TN/TFCOVER. (Sold Individually)

Features:

  • IP65 structure
  • Lightning and surge protection
  • Anti-frost hood cover
  • 99% beam blocking stability
  • A.G.C circuit
  • Adjustable beam interruption time

Item#:
AX-70TN
 
Spec Sheet
You must be logged in to order this item. Log in here

Blue Line Gen 2 Tritech 20x20ft. Pet Friendly Selectable

Item#:
ISC-BDL2-WP6G
 
Product Manual
Assembly Instructions
You must be logged in to order this item. Log in here

PIR with Pet Immunity up to 55 lbs - Pack of 6

Features:

  • The LC-100-PI (Form 'A' contact) detectors feature intelligent signal analysis for reliable detection, pet immunity up to 55 lb (25 kg) and slim design that complements any décor.
  • Form 'A' or alarm contact and tamper switch
  • Digital signal analysis
  • Pet immunity up to 55 lb (25 kg)
  • Quad Linear Imaging Technology for sharp analysis of body dimensions and differentiation from backgrounds and pets
  • Advanced ASIC-based electronics
  • Compact design for residential installations
  • Adjustable variable pulse count
  • PIR sensitivity adjustment
  • Height installation calibration free
  • Available in packages of 6 (LC-100-PI-6PK)
  • LC-L1ST bracket available separately
  • Corridor lens available separately
Item#:
LC-100-PI-6PK
 
Spec Sheet
You must be logged in to order this item. Log in here

Wireless Ready 100 ft. outdoor/ 200 ft. Indoor Battery Powered

Wireless Ready 100 ft. outdoor/ 200 ft. Indoor Battery Powered Photoelectric Detector (4 batteries included)

Item#:
AX-100TFR
 
Spec Sheet
You must be logged in to order this item. Log in here

PowerG 915Mhz Wireless Dual Tech Motion Detector w/Pet Immunity up to 85lbs

The PG9984P Wireless PowerG Dual Technology Motion detector combines advanced PIR detection algorithms with K-band microwave detection to dramatically reduce false alarm events even in harsh installations. The PG9984P sends an alarm signal after both the PIR and the microwave sensors have detected an intruder, significantly reducing false alarms.

The PG9984P uses a combination of elliptical parabolic mirror optics. An innovative mirror with extremely high optical gain delivers an extended range and provides superior detection sensitivity.
The PG9984P also applies a digital temperature compensation that allows the detector to continuously adjust its sensitivity according to the location temperature. In this way, the PG9984P is able to detect an intruder even when the ambient temperature is close to that one of the human body.
Finally, the PG9984P uses an obsidian black mirror technology. A unique, nickel-based, obsidian-like, reflective surface acts as a selective optical filter of infrared energy. In this way, the PG9984P can virtually eliminate white light interference and increase detection sensitivity.

Features:

  • Visible link quality indicator on device
  • Vandal-resistant design
  • Dual Technology PIR and K-Band Microwave frequency to reduce false alarms
  • Dimensions: 115 x 60 x 48mm (4.5 x 2.3 x 1.9in)
Item#:
PG9984P
 
Spec Sheet
You must be logged in to order this item. Log in here

PowerG 915Mhz Wireless 360 Degree Ceiling Mount PIR Detector

The PowerG Wireless 360° Ceiling-mount PIR Detector is a highly robust motion detector, suited for residential and small to mid-size businesses requiring detection coverage of up to 10m (32.8ft) in diameter.
Uniquely designed for discreet and hard-to-reach ceiling placement, the detector is visually attractive, and tamper-resistant. Based on built-in PowerG leading-edge wireless technology, this sophisticated detector delivers proven motion detection with superior immunity to false alarms.
  • Delivers 360° motion detection from a ceiling-mounted device
  • Fully secures small to mid-sized rooms with detection coverage of up to 10m (32.8ft) in diameter
  • Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology with two-way communication
  • Minimizes visual impact, with a modern, unobtrusive design
  • Offers long-lasting value with a 5-year battery life (typical use)
  • Simple to install and maintain
Item#:
PG9862
 
Spec Sheet
You must be logged in to order this item. Log in here

PowerG 915MHz Wireless Curtain Motion Detector

The PG9924 Wireless PowerG Curtain PIR Motion Detector is a vital component of a security system. Upon the detection of motion, the PG9924 communicates an alert to the security system. The PG9924 is a compact, elegant wireless curtain-type PIR detector for indoor use designed for the protection of doors, windows and all-glass walls.

The PG9924 Wireless PowerG Curtain PIR Motion Detector is equipped with a visible signal quality LED indicator that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad. Additionally, device configuration options, such as the detection range, are quick and easy with no hardware switches or need to re-open devices. All device configuration settings are handled on the keypad with no need to reopen the device once installed.

Features
  • Visible link quality indicator on device
  • Ideal for protection of doors and windows
  • Selectable curtain coverage 2, 4 and 6 m (6,12,18ft)
  • Front cover and back tamper
  • Prolonged battery life (7 years with typical use)
  • Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
Item#:
PG9924
 
Spec Sheet
You must be logged in to order this item. Log in here

Wireless Ready 130' X 33' Supe rior Intelligent PIR detector

Item#:
SIP-4010WF
 
Spec Sheet
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 370 ▶ ▶|
View:
(Denotes required field.)