S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The DS160 Series consists of the DS160 Detector (light gray) and the DS161 Detector (black) specifically designed for Request-to-exit (REX) applications. With features such as timers, door monitor with sounder alert, and pointable coverage, the DS160 and DS161 have the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device.
Features
Item#:
DS160
You must be logged in to order this item.
Log in here
- IR sensor detection range up to approximately 4"
- Dual color LED, red/green indicate active/inactive status
- Time delay settable from 1 to 35 seconds
- Single gang stainless steel, weather resistant, vandal resistant face plate
- Operates on 12 or 24VDC
- S.P.D.T. relay rated 2 Amps @ 30VAC or VDC
- Temperature range -25C to +55C
Item#:
NTS-1
You must be logged in to order this item.
Log in here
- Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
- Mounted next to door
- Momentarily pressing the button releases door for 30 seconds
- Retriggerable
- Single Gang or Narrow Stile
- SPST 3 Amp wet N/C contacts
- Operates on 12 or 24 VDC (must be same voltage as the installed lock)
- For indoor use only
- Includes switchable green, red and blue ADA lenses
- UL Listed
Item#:
EEB2
You must be logged in to order this item.
Log in here
The REX sensor is specifically designed for indoor Request-To-Exit applications and features a passive infrared sensor with qualified motion analysis. The sensitivity of the REX sensor can be easily adjusted for long or short range applications and features an adjustable time delay. Because of its sleek design, the REX sensor is easily mounted to any frame, header wall, or ceiling.
Item#:
REXM
You must be logged in to order this item.
Log in here
The ENFORCER Wireless Desktop Transmitter is the ideal solution for difficult access control installations. The Wireless Desktop Transmitter is perfect for various desktop applications, mounting on cement or brick walls, or any other location where it is difficult to run wires.
- Built-in RF transmitter, 315MHz
- Powered by 9VDC battery (included)
- Range up to 250ft (76m)*
- Over 68 billion (6.8x1010) possible codes
- LED to indicate transmission and low battery
- Placed on a desktop or wall mounted
- ABS Plastic single-gang plate
- Green 2" square button
- English, Spanish, French, and blank message plates included
- Requires a SK-910 (315MHz) series receiver
Item#:
SD-862T-GWSQ
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)