The Model 302850 2-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receivers Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay outputs can switch up to 1 amp @ 30 VAC. 3-foot, 2-conductor wire leads with spade lugs are provided for attachment to the gate operators radio activation terminals.

The receiver is programmed with a 9-position coding switch. When a transmitter set to the same code is activated, the receivers output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will activate.

• Operates on 12-24 volts AC or DC power
• Two channels
• Whip antenna
• 3-foot antenna coax and bulkhead connector
• Codes: 512 (set by dip switches)
• RF frequency: 300 MHz or 310 MHz (jumper selectable)
• Dimensions: 3.625" W x 5.25" H x 1.5" D

The ULTRA V-2 vehicle loop detector combines small size with full-featured functionality in a plug-in module.

This plug-in style vehicle loop detector provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. In addition, the ULTRA V-2 has options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence.

The ULTRA V-2 is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER display. Ten sensitivity settings allow for finer adjustment of the detection level and four frequency selections help to prevent crosstalk in multi-loop applications.

This plug-in style vehicle loop detector is compatible with a wide variety of gate operators. Please see the spec sheet for a detailed list.

Features

• Easy to install and set up with the ULTRAMETER sensitivity display
• Compact design
• Energy efficient
• Compatible with many gate operators
• Cost effective