Rosslares AY-K12C is a powerful RFID proximity card reader of EM 4102 125-kHz cards and tags. The reader is highly flexible with behavior control options. With a sleek design and a tough UV-resistant and water-resistant casing, the AY-K12C is equally suited for indoor and outdoor use.

Features

• Selectable output formats: Wiegand 26-Bit or Clock & Data
• Excellent RFID card read range of up to 8 cm (3.15 in.)
• Wide range operating voltage: 5 to 16 VDC
• 45 cm (18 in.) pigtail cable

Features

• Long read range distance (up to 6 ft. with ProxPass).
• Autotune allows read range to be maintained within four inches of metal.
• Wiegand, Clock-and-Data and selectable serial outputs available.
• "Parking hold" feature allows connection to a loop detector to ensure accurate detection of vehicles in parking lanes.
• Compatible with all HID cards and tags with formats up to 85 bits.
• Multicolor LED with internal or host control of the LED and beeper.
• Two MaxiProx units can operate one meter apart for "HI-LO" (truck and car) installations.
• Reader supervision signal for CASI-RUSCO panels.

Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• External LED control
• External Buzzer Control
• Indoor/Outdoor operation
• Solid Epoxy potted
• Waterproof IP65
• Reverse Polarity Protection

Up to 20.5 cm (8 in) Read Range, Black

• Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities
• Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
• Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
• Up to 480 programmable input codes of one to six digits each for activating either or both relays
• Two LED indicators show system status
• Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout
• Programmable courtesy light illuminates keypad for 1, 2, 3, or 4 minutes, or always on
• Tactile and audible feedback
• Keylock secures keypad to mounting backplate
• 4″ W x 5.5″ H x 3″ D

• Wall switch size reader
• Suitable for indoor/outdoor use
• Temperature threshold -35 C to 65 C
• Read range maximum 4-5 in.
• 4.5 H x 2.99 W x 0.85 D in.
• 12VDC operation @ 100 mA
• Keyscan 36 bit format

Up to 20.5 cm (8 in) Read Range, Black

KR500H is an outdoor IP67-rated tamper-resistant multi-technology proximity card reader capable of reading HID, ZKAccess and Pyramid 125 kHz 26-bit proximity cards.
Due to its conveniently small mullion size, KR500H is the ideal card access solution for any metal doors with thin frames, parking gates, fences, turnstiles or any security device having a narrow mounting surface. For the highest level of security KR500H has a built-in Wiegand-Out port which can be connected to most any access control panel (including ZKAccess C3 and InBio door controllers).