S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The PG9935 Wireless PowerG Shock Detector provides perimeter protection for residential and commercial premises. It provides early warning of an attempted intrusion by sensing forced entry before a burglar actually enters the property. This potentially reduces the damage and losses to a property as a result of a break in and provides home and business owners with enhanced security.
The PG9935 also includes an optional magnetic contact. The magnetic contact protects door/ window openings and alerts if an intruder tries to mask the magnetic field of the contact.
Additionally, the PG9935 includes an optional auxiliary input in which the connection of other hardwired devices can be made. The auxiliary input is configurable to be Normally Open, Normally Closed or Single End-of-Line.
The PG9935 wireless shock detector senses and analyses series of low-level shocks while ignoring background vibrations, a major cause of false alarms.
The PG9935 wireless shock detector integrates a unique, 7-segment display that allows the installer to set the shock level and displays the actual shock level while testing. This enables fast and accurate setup of the device to ensure superior detection and reduced false alarms.
Features:
- Visible link quality indicator on the device
- High immunity to background vibrations
- Adjustable shock/vibration thresholds
- Front and Back tamper
- Optional magnetic reed switch contact
- Early detection of gross attacks or low-level shocks
- Protects windows, doors, walls and roofs against forced entry
- Quick and easy installation using unique 7-segment shock meter and pushbuttons
- Prolonged battery life (5 years with typical use) with all sensors enabled
Item#:
PG9935
You must be logged in to order this item.
Log in here
Know the garage door is open with the IQ Tilt-S, a simple, encrypted, device that the panel whether the overhead garage door is open or closed. Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Detects whether door is open or closed
- Receive a text message if the garage is left open when you leave your house
- Sensor: 2.5"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air.
- Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
Item#:
QS1131-840
You must be logged in to order this item.
Log in here
The IQ Shock-S is an encrypted sensor with superior range specifically designed with multi-level vibration detection. It can alert you if a door is left open, automatically adjust your smart thermostat to save you energy, and provide security for anything that opens or closes. Know when these doors and windows are opened with customizable chimes and unique names spoken by the panels text-to-speech. Create personalized notifications and rules with the interactive app.
- Dimensions: 23.97mm D x 39.91mm W x 79.60mm L
- Frequency: 319.5 MHz
- Battery: 3V lithium CR123A
- Magnet Gap: 1 inch max
- Operating Temperature: 32- 110F (0- 45C)
- Operating Humidity: 5 - 85% RH non-condensing
- Supervisory signal interval: 60 min (approximately)
- Potentiometer: Shock sensitivity adjustment
Item#:
QS1138-840
You must be logged in to order this item.
Log in here
- Solid State Piezo Electric Sensor
- Latching Bi-Colored LED for Visual Confirmation
- On-Board Tamper Switch in Series with Alarm Relay Contacts
- Wide Range of Surface Protection Including Glass, Walls, Doors
Item#:
GRISG-1
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
Honeywell’s SC100 Series Seismic Vibration Sensors were designed to protect high-value and high-risk assets in financial, retail and other applications.
The SC100 model detects vibrations arising from attempts to disturb solid structures including fixed ATMs, bank vaults, safes and doors. The SC100 can be installed in new or existing security systems and offer a higher level of protection and false alarm immunity than traditional shock sensors, which often lack the ability to discriminate between ambient vibration and real attacks.
The SC100 Series contain several unique features that reduce installation time and costs—including a Universal setting that lets dealers choose between safes and vaults with the change of a dip switch, integrated end-of-line (EOL) resistors that improve connectivity to the control panel, a built-in diagnostic tool and a compact size that enables placement inside small areas.
- Detects attacks on Bank vault doors, ATMs, night deposit safes, strong room vaults, modular vaults, vending machines, freestanding safes, hatches, gates, chests and other objects with a solid structure
- Detects attacks from
- Heavy strokes or gross attacks from sledgehammers or explosives
- Repeated knocks from hammers and chisels
- Drilling, mechanical cutting, acetylene torches, thermal cutting, water-cooled diamond drills, water jet cutting tools, hydraulic jacks (SC100 only)
- Compact size Smallest available on market so fits easier when space is limited
- Universal (ATM and vault) The SC100 can also be used for ATMs and night deposit safes by the simple change of a dip switch. No separate sensors are required.
- Drilling shield (standard) Protects electronics inside against sabotage
- Extended temperature Allows operation in extreme temperature conditions (-40° F to 158° F)
- Remote sensitivity reduction input Option to reduce sensor sensitivity remotely during maintenance on ATMs, thereby reducing false alarms
- Multi-compatible mounting plate fits on pre-fab holes Fits on most pre-drilled mounting holes from other seismic sensors, preventing time consuming drilling/threading. The same mounting plate can be used for mounting on concrete and welding on steel.
- Integrated End-of-Line (EOL) resistors EOL resistors for alarm as well as tamper loop are already incorporated, saving installation time and reducing service calls
- Integrated temperature alarm The SC100 and SC105 will alarm if the temperature exceeds 185° F. Additionally the SC100 version alarms when temperature rises faster than 6° F per minute.
- Diagnostic LED Built-in tool easily selects correct sensitivity; no time consuming external tools required
- Selectable sensitivity Four different sensitivity settings adapt to required range and environmental conditions
- Remote testing and test transmitters Input to remotely start functional test with help of SC113 (Internal Test Transmitter) or SC115 (External Test Transmitter). If no test transmitter is available, it is possible to test internal electronics with this test.
- Available accessories Mounting plate, keyhole protection kit, day/night kit, Internal Test Transmitter, armed cable and External Test Transmitter. This range of accessories allows the SC100 and SC105 Seismic Sensors to be mounted in a wide range of applications.
- Listed to UL639
- Listed to ULC-S306
Item#:
SC100
You must be logged in to order this item.
Log in here
Honeywell's SC100 Series Seismic Vibration Sensors were designed to protect high-value and high-risk assets in financial, retail and other applications.
The SC105 was designed to safeguard freestanding objects like standalone ATMs, gun cases, file cabinets, vending and ticket machines and more. The SC105 can be installed in new or existing security systems and offer a higher level of protection and false alarm immunity than traditional shock sensors, which often lack the ability to discriminate between ambient vibration and real attacks.
The SC100 Series contain several unique features that reduce installation time and costs—including a Universal setting that lets dealers choose between safes and vaults with the change of a dip switch, integrated end-of-line (EOL) resistors that improve connectivity to the control panel, a built-in diagnostic tool and a compact size that enables placement inside small areas.
- Detects attacks on Bank vault doors, ATMs, night deposit safes, strong room vaults, modular vaults, vending machines, freestanding safes, hatches, gates, chests and other objects with a solid structure
- Detects attacks from
- Heavy strokes or gross attacks from sledgehammers or explosives
- Repeated knocks from hammers and chisels
- Drilling, mechanical cutting, acetylene torches, thermal cutting, water-cooled diamond drills, water jet cutting tools, hydraulic jacks (SC100 only)
- Compact size Smallest available on market so fits easier when space is limited
- Universal (ATM and vault) The SC100 can also be used for ATMs and night deposit safes by the simple change of a dip switch. No separate sensors are required.
- Drilling shield (standard) Protects electronics inside against sabotage
- Extended temperature Allows operation in extreme temperature conditions (-40° F to 158° F)
- Remote sensitivity reduction input Option to reduce sensor sensitivity remotely during maintenance on ATMs, thereby reducing false alarms
- Multi-compatible mounting plate fits on pre-fab holes Fits on most pre-drilled mounting holes from other seismic sensors, preventing time consuming drilling/threading. The same mounting plate can be used for mounting on concrete and welding on steel.
- Integrated End-of-Line (EOL) resistors EOL resistors for alarm as well as tamper loop are already incorporated, saving installation time and reducing service calls
- Integrated temperature alarm The SC100 and SC105 will alarm if the temperature exceeds 185° F. Additionally the SC100 version alarms when temperature rises faster than 6° F per minute.
- Diagnostic LED Built-in tool easily selects correct sensitivity; no time consuming external tools required
- Selectable sensitivity Four different sensitivity settings adapt to required range and environmental conditions
- Remote testing and test transmitters Input to remotely start functional test with help of SC113 (Internal Test Transmitter) or SC115 (External Test Transmitter). If no test transmitter is available, it is possible to test internal electronics with this test.
- Available accessories Mounting plate, keyhole protection kit, day/night kit, Internal Test Transmitter, armed cable and External Test Transmitter. This range of accessories allows the SC100 and SC105 Seismic Sensors to be mounted in a wide range of applications.
- Listed to UL639
- Listed to ULC-S306
Item#:
SC105
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)