S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The IQ Recessed-S is our most powerful S-line sensor ever. Leveraging the proprietary S-Line Technology, to encrypt signals sent to the panel. The IQ Recessed-S is installed in the core of your door, forever changing the idea of security and smart home applications. Create rules such as "when door opens, turn on the light" or "if door left open, adjust my thermostat to save energy until it is closed again." With the longest and most powerful range of our S-Line, you want to make sure the IQ Recessed-S makes it into every door you own.
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Placed in the core of your door for an almost invisible installation
- Powerful earth magnet for a strong connection
NanoMax is the smallest full-featured security transmitter in the industry. It is typically used to sense opening and closings of doors and windows, but can secure just about anything using its Strip & Stick external contact holes. It will alarm when the magnet is pulled away from the NanoMax or when the external contact is opened.
- Low-profile and discreet
- Amazing RF range
- Up to 1-inch magnet gap
- Support for an external contact
- Peel and stick installation
- 6+ year battery life
- 5-year warranty
- Industry-leading wireless range and battery life
- One door window zone and two external contact zones
- Secure encrypted wireless transmissions
- 5-year warranty
Features:
- Subtle and secure protection of windows and doors
- Compact, near-invisible device
- Built-in PowerG wireless intrusion technology with two-way communication
- Long-lasting battery (up to 10 years with typical use)
- Simple installation and maintenance
- Ultra-thin magnet (0.08In / 2mm) reduces the need for drilling
- Ideal for residential and light commercial use
- White and clear versions available to further reduce visual impact
To enroll the DWS-LL, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the LongLife sensor. Alternatively, the LongLife sensor can be enrolled by scanning its bar code using the Alula app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the DWS-LL, begin by removing the adhesive paper and adhering the LongLife contact and magnet on a door or window. Clean the surface of where you plan on mounting it. Leave a minimum of 3/16 inch clearance around the ends of the sensor to allow the cover to open. Make sure to align the alignment marks on the LongLife and magnet when mounting. Alternatively, LongLife can be used with an external contact instead of the reed switch.
The High Bond Tape (3M VHB Tape) works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The LongLife wireless performance is optimized when mounted near the top of the door in a vertical orientation.
- Low-profile design
- Easy, slide-open cover
- Battery pull-tab enrollment
- 5-year product warranty
- 10-year battery life (replaceable)
S2K Administration - Form Template Display
Actions