|◀ ◀ 397 - 408 of 431 ▶ ▶|
View:

29 VAC, 4.2 Amp, Class 1, Open Frame

Item#:
T-29V120A
You must be logged in to order this item. Log in here

UL Power Supply

The PS3002 is a 12-volt, 1.9-ampere continuous regulated power supply. Designed to support numerous control panels, the module increases the panels available standby current and provides an ac-only mode of operation as required by UL and NFPA for residential fire applications. A 50VA, 16.5-volt transformer and all required mounting hardware are supplied.

The PS3002 is UL listed for Central Station, Police Station Connect, Household Fire and Household Burglar Alarm System Units. (For UL Certified installations, the PS3002 must be wired as part of a supervised system.

In the ac-only mode, the PS3002 can supply auxiliary and/or siren current up to a maximum total of 1.9 ampereswhere the auxiliary current from the PS3002 does not exceed 1.4 amperes.

Item#:
PS3002
You must be logged in to order this item. Log in here

12/24 VDC, 8/4 AMP Power Suppl y Board

Item#:
PS5-M-000-UL
You must be logged in to order this item. Log in here

16 VAC, 9 Amp, Class 1, Open F rame

Item#:
T-12V5A
You must be logged in to order this item. Log in here

12VDC,10A 8 PTC Out Cab PS - 12VDC @ 10 amp, PTC outputs,

Item#:
SMP10PM12P8CB
You must be logged in to order this item. Log in here

snap track for mounting syste m components; 2.75" W x 3" L

Item#:
2TK2-3
You must be logged in to order this item. Log in here

TRANSFORMER 24VAC 40VA

Item#:
REVRT2440
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 12/24VDC @ 4A, 115VAC, Board

OLS120 power supply/charger converts a 115VAC, 50/60Hz or 230VAC, 50/60Hz input into a 12VDC or 24VDC output @ 4A continuous supply current (see specifications). This unit has a wide range of applications for access control and security system accessories that require additional power.

Features:

  • Power ON/OFF switch.
  • Includes battery leads.

Specifications:
Input:
  • Universal input 115VAC, 50/60Hz, 0.95A or 230VAC, 50/60Hz, 0.6A.
Output:
  • 12VDC or 24VDC selectable output.
  • 4A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision:
  • AC fail supervision (form C contacts).
  • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Operating temperature: 0° C to 55° C (32° F to 131° F).
  • Storage - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.):
      • 12VDC: 25 BTU/Hr.
      • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 115VAC: 109.25VA.
    • 230VAC: 138VA.

Item#:
OLS120
You must be logged in to order this item. Log in here

12 VDC, 8 A & 24 VDC, 8 A w/ 1 2 relay & 15 constant otpts, X

Item#:
PS-12408-UL-1215
You must be logged in to order this item. Log in here

P112 packed with 12V, 5Ah Battery

Includes:
  • ELK-P624 Power Supply Board
  • ELK-TRG1640 Transformer
  • ELK-UB12 12" Metal Can
  • ELK-1250 12V 5Ah Sealed Lead Acid Battery
  • 4 pieces of Double Sided Tape
  • Instructions
The ELK-P112 is a high quality Power Supply with a plug-in transformer and metal can enclosure. The P112 produces 12VDC @ 1 Amp. It features automatic resetting "fuseless" overload protection and diagnostic LED indicators. They are ideal for alarm, access control, and CCTV applications. Can be ordered with rechargeable battery by adding the "K" suffix. The P112K includes a 12V 5Ah battery.
  • Built-In Battery Charging Circuit.
  • Auto Reset "fuseless" Overload Protection (PTC).
  • Visual AC and DC Power Indicators.
  • AC and DC Surge Suppression.
  • Regulated Output Voltage: 13.8 VDC 
  • Continuous Current Rating: 1 Amp
  • Included Transformer: 16.5 V 45 VA
  • Dimensions: 12" H x 12" W x 3.5" D
  • Battery Recharging Capacity: 1.2Ah to 10 Ah
Item#:
P112K
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 12/24VDC @ 10A, 24VAC, Board

SMP10 power supply/charger converts low voltage AC input into 12VDC or 24VDC @ 10A of continuous supply current (refer to specifications). This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power (Voltage Output/Transformer Selection Table).

Specifications:
Input:

  • Input 24/28VAC.
  • (Voltage Output/Transformer Selection Table).
Output:
  • 12VDC or 24VDC selectable output.
  • 10A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C (-4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
    • BTU/Hr. (approx.):
      • 12VDC: 61 BTU/Hr.
      • 24VDC: 123 BTU/Hr.

Item#:
SMP10
You must be logged in to order this item. Log in here

12/24 VDC, 8/4 AMP, med Red ca binet, Listed

Item#:
PS5-M-003-UL-RED
You must be logged in to order this item. Log in here
|◀ ◀ 397 - 408 of 431 ▶ ▶|
View:
(Denotes required field.)