POWER SUPPLIES - Page 33 of 36

Compare

Power Supply Charger, Single Output, 12/24VDC @ 2.5A, 115/220VAC

SMP3PMCTX supervised power supply/charger will convert a 115VAC/230VAC, 50/60Hz input, into a regulated 12VDC or 24VDC output @ 2.5A continuous supply current.

Specifications:
Input:

Input 115VAC, 50/60Hz, 0.65A or 230VAC, 50/60Hz, 0.35A.

Output:

12VDC or 24VDC selectable output.
2.5A supply current.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.

Battery Backup:

Built-in charger for sealed lead acid or gel type batteries.
Zero voltage drop when switching over to battery backup.

Supervision:

AC fail supervision (form C contacts).
Low battery supervision (form C contacts).

Visual Indicators:

AC input and DC output LED indicators.

Temperature:

Operating 0° C to 49° C (32° F to 120° F).
Storage - 20° C to 70°C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.):
- 12VDC: 15 BTU/Hr.
- 24VDC: 31 BTU/Hr.
System AC input VA requirement:
- 115VAC: 74.75VA.
- 230VAC: 80.5VA.

Item#:

SMP3PMCTX

You must be logged in to order this item. Log in here

Compare

snap track for mounting syste m components; 3" W x 48" L

Item#:

TK2-48

You must be logged in to order this item. Log in here

Compare

PDUMH15NET2LX PDU, LX Interface, 120V Outlet

Item#:

PDUMH15NET2LX

You must be logged in to order this item. Log in here

Compare

1.5 Amp, 6-12 Vdc generic powe r supply.

Item#:

PS1520

You must be logged in to order this item. Log in here

Compare

Power Supply Charger, Single Output, 12/24VDC @ 6A, 115VAC, Board

OLS180 power supply/charger converts a 115VAC, 50/60Hz input into a 12VDC or 24VDC output @ 6A continuous supply current (see specifications). This unit has a wide range of applications for access control and security system accessories that require additional power.

Features:

Power ON/OFF switch.

Includes battery leads.

Specifications:

Input:

115VAC, 50/60Hz, 1.9A.

Output:

12VDC or 24VDC selectable output.
6A continuous supply current.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.

Battery Backup:

Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.

Supervision:

AC fail supervision (form C contacts).
Low battery supervision (form C contacts).

Visual Indicators:

AC input and DC output LED indicators.

Electrical:

Temperature:
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
- BTU/Hr (approx.):
  - 12VDC: 37 BTU/Hr.
  - 24VDC: 74 BTU/Hr.
System AC input VA requirement: 218.5VA.

Item#:

OLS180

You must be logged in to order this item. Log in here

Compare

29 VAC, 4.2 Amp, Class 1, Open Frame

Item#:

T-29V120A

You must be logged in to order this item. Log in here

Compare

UL Power Supply

The PS3002 is a 12-volt, 1.9-ampere continuous regulated power supply. Designed to support numerous control panels, the module increases the panels available standby current and provides an ac-only mode of operation as required by UL and NFPA for residential fire applications. A 50VA, 16.5-volt transformer and all required mounting hardware are supplied.

The PS3002 is UL listed for Central Station, Police Station Connect, Household Fire and Household Burglar Alarm System Units. (For UL Certified installations, the PS3002 must be wired as part of a supervised system.

In the ac-only mode, the PS3002 can supply auxiliary and/or siren current up to a maximum total of 1.9 ampereswhere the auxiliary current from the PS3002 does not exceed 1.4 amperes.

Item#:

PS3002

You must be logged in to order this item. Log in here