|◀ 421 - 431 of 431 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The PP5 Power Adapter is one of two power options for the W Series control panels (WIP620, WIP630). The PP5 power option gives the installer the freedom to use a longer length of wire to mount the control panel farther from the wall plug if needed. A power option must always be chosen for every control panel.

In case of power failure, a rechargeable Lithium battery is included with every W panel, providing 72 hour backup with 6 alarms.

Item#:
PP5
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The ELK-P412 is a general purpose high current power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 4 Amps. The ELK-P412 distributes 12VDC power to three (3) sets of DC power terminals, each having a voltage present indicator LED and automatic resetting overload protection. It also features a master On/Off switch and built-in low battery cut-off to protect the backup battery from deep discharging if AC power is off for an extended time.
Includes:

  • Switching Power Supply
  • Power Distribution Board
  • 3 Conductor Power Cord
  • ELK-UB12 12 Metal Can
  • Instructions
Features:
  • Switching Power Supply, no transformer needed.
  • Auto Reset fuseless Overload Protection (PTC).
  • Three (3) Individual PTC Protected Power Outputs.
  • Master Power On/Off Switch.
  • Built-in Low Battery Cutoff Circuit.
  • Visual Power Indicators.
  • AC and DC Surge Suppression.
  • Includes Six foot AC Power Cord.
  • Lifetime Limited Warranty.
Specifications:
  • Regulated Output Voltage: 13.8 Volts D.C.
  • Continuous Current Rating: 4 Amps.
  • AC Input Voltage Range: 85~264 VAC @ 47-63Hz.
  • Low Battery Cutoff: ~/= 10 Volts.
  • Ripple and Noise: 100mV p-p.
  • Dimensions: 12 in. W x 12 in. H x 3.5 in. D.
Item#:
P412
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

SMP3PMCTX supervised power supply/charger will convert a 115VAC/230VAC, 50/60Hz input, into a regulated 12VDC or 24VDC output @ 2.5A continuous supply current.

Specifications:
Input:

  • Input 115VAC, 50/60Hz, 0.65A or 230VAC, 50/60Hz, 0.35A.
Output:
  • 12VDC or 24VDC selectable output.
  • 2.5A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Supervision:
  • AC fail supervision (form C contacts).
  • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating 0° C to 49° C (32° F to 120° F).
  • Storage - 20° C to 70°C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 115VAC: 74.75VA.
    • 230VAC: 80.5VA.

Item#:
SMP3PMCTX
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 421 - 431 of 431 ▶|
View:
(Denotes required field.)