|◀ ◀ 1 - 12 of 429 ▶ ▶|
View:

AL400 ULX W/PD4 INSTALL - 12VDC @ 4 amp or 24VDC @ 3 a

AL400ULPD4 is a multi-output power supply/charger that converts a 115VAC/60Hz input into four (4) Class 2 Rated 12VDC or 24VDC power limited outputs.
Input

  • Input 115VAC, 60Hz, 3.5A.
  • Input fuse rated @ 3.5A/250V.
Output
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Four (4) Class 2 Rated fuse protected power limited outputs.
  • Outputs are rated @ 3.5A.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Item#:
AL400ULPD4
You must be logged in to order this item. Log in here

POWER CORD 3 CONDUCTOR 3 FEET

Item#:
AK500/14-OE-5-1
You must be logged in to order this item. Log in here

Linear Power Supply Charger, Single Class 2 Output, 6/12/24VDC @ 1.2A

Altronix AL624 power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC output. This general purpose power supply has a wide range of applications for access control, security, and CCTV system accessories that require additional power.

Specifications:

  • Switch selectable 6VDC-12VDC-24VDC.
  • 6VDC or 12VDC @ 1.2 amp supply current or 24VDC @ .75 amp supply current.
  • Input 16VAC to 24VAC, 20VA to 40VA.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current 300mA.
  • Automatic switchover to stand-by battery when AC fails (zero voltage drop).
  • PTC battery protection.
  • AC input and DC output LEDs.
  • Extremely compact design.
  • Includes battery leads.

Item#:
AL624
You must be logged in to order this item. Log in here

AL400UL UL PS W/LARGE GRY CABT 4 amp or 24VDC @ 3 amp, AC &

Input

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision
  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts).
Visual Indicators
  • AC input, DC outputand Battery LED indicators.
Item#:
AL400ULX
You must be logged in to order this item. Log in here

Mounting Magnets 24 Pack; incl 24) Quantity per Pack

Item#:
MM24
You must be logged in to order this item. Log in here

Power Distribution Module, 8 PTC Outputs up to 28VAC/VDC, Board

Altronix PD8ULCB UL Listed Sub-Assembly power distribution module is designed to convert a single AC or DC input into eight (8) PTC protected Class 2 Rated powerlimited outputs.

Specifications:
Input:

  • 12VDC or 24VDC, up to 10A or 24VAC or 28VAC, up to 12A.
Output:
  • Eight (8) individually PTC protected outputs @ 2A per output max. current (total output current should not exceed max. current rating of power supply employed).
  • PTCs rated @ 2A/250V.
Visual Indicators:
  • Power on green LED indicator.
Electrical:
  • Operating temperature: 0 to 49° C (32 to 120° F).
  • Storage - 20 to 70° C ( - 4 to 158° F).
  • Relative Humidity 85% +/- 5%.

Item#:
PD8ULCB
You must be logged in to order this item. Log in here

UL POWER DISTRIB UNIT W/CB dule - Converts AC or DC power

Item#:
PD4ULCB
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

SMP3E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5A continuous supply current. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.
  • Power supply/charger with enclosure.
  • Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries.

Specifications:
Input:
  • 6VDC or 12VDC output use TP1640 or 24VDC output use T2428100.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3E
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 4A, 24/28VAC, Board

SMP5 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Trac compatible (order Altronix model number ST3).

Specifications:
Input:
  • 6VDC applications use TP1640.
  • 12VDC applications use T2428100.
  • 24VDC applications use T2428175.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 4A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 13 BTU/Hr.
    • 12VDC: 25 BTU/Hr.
    • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC: 55.2VA.
    • 12VDC/24VDC: 115VA.

Item#:
SMP5
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 24/28VAC

SMP3PM supervised power supply/charger converts a low voltage AC input into a 12VDC or 24VDC output. This unit has a wide range of applications for access control,security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.

Specifications:
Input:
  • 12VDC applications use TP1640, T2428100.
  • 24VDC applications use T2428100.
Output:
  • 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Supervision:
  • AC fail supervision (form C contacts).
  • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating Temperature: 0° C to 49° C (32° F to 120° F).
    • Storage Temperature: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3PM
You must be logged in to order this item. Log in here

Relay Module, 12/24VDC, DPDT Contacts @ 1A - 120VAC or 2A - 28VDC

RBSN relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

  • 12VDC or 24VDC operation.
  • Current draw: 15mA.
Contact Rating
  • 1A/120VAC or 2A/28VDC DPDT contacts.
Temperature
  • Operating -25ºC to 55ºC ( -13ºF to 131ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.
  • System AC input VA requirement:
  • 12VDC: 1.8VA.
  • 24VDC: 3.6VA.

Item#:
RBSN
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Specifications:
Input:

  • 16VDC from TP1640 plug-in transformer.
Output:
  • 6VDC or 12VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 276VA.

Item#:
SMP3ET
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 429 ▶ ▶|
View:
(Denotes required field.)