|◀ ◀ 13 - 24 of 431 ▶ ▶|
View:

Power Supply Charger, Single Output, 12VDC @ 10A, 115VAC, BC300 Enclosure

SMP10C12X power supply/charger converts a 115VAC / 60Hz input into a regulated 12VDC output @ 10A continuous supply current.

Specifications:
Input:

  • Input 115VAC, 60Hz, 1.45A.
Output:
  • 12VDC output.
  • 10A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.): 61 BTU/Hr.
  • System AC input VA requirement: 166.75VA.

Item#:
SMP10C12X
You must be logged in to order this item. Log in here

Replacement Power Supply

Features:

  • High efficiency switching power supply
  • 120 VAC @ 60 Hz input
  • 14 VDC @ 1700 mA output
  • Screw terminals for wiring connecting to the Control Panel
  • Includes retaining bracket for standard and Decora style outlets
  • For use with GC2 or GC3 panels.

Item#:
2GIG-AC1
You must be logged in to order this item. Log in here

High Current Power Distribution to 9 Devices (400mA ea)

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a single Master Power On/Off Switch. The modules accept a 6 to 30 Volt A.C. or D.C. power source (not included) which connects either to the input terminal block or the 2.1mm D.C. power jack located on the module. Two or more outputs can be paralleled for additional current.
  • Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
  • Master Power On/Off Switch.
  • Visual LED Power Indicators on each Output.
  • Convenient Test Points for measuring Total Current Draw.
  • Lifetime Limited Warranty.
  • Paintable White Plastic
  • Max Current Draw: 400mA from each output.
  • Max Combined Current Draw: Not to exceed Input Power Source
  • Input/Output Voltage: 6 to 30 Volts AC or DC
  • Input Connection:Screw Terminals or 2.1mm Plug-In DC Jack
  • Output Connection:Screw terminals (POS and NEG) for each output
  • Enclosure Size:6.5" x 4.3" x 2"
Item#:
PD9HC
You must be logged in to order this item. Log in here

POWER SUPPLY PLUG IN 12VDC 1.0 AMP

Item#:
PEAKPA10A
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 12/24VDC @ 4A, 115VAC, Supervision

SMP5PMCTX supervised power supply/charger converts a 115VAC/230VAC, 50/60Hz input into a regulated 12VDC or 24VDC output @ 4A continuous supply current.

Specifications:
Input:

  • Input 115VAC, 50/60Hz, 0.95A or 230VAC, 50/60Hz, 0.5A.
Output:
  • 12VDC or 24VDC selectable output.
  • 4A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Supervision:
  • AC fail supervision (form C contacts).
    • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 12VDC: 25 BTU/Hr.
    • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 115VAC: 109.25VA.
    • 230VAC: 115VA

Item#:
SMP5PMCTX
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 24/28VAC, Board

Altronix SMP3 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Track compatible (order Altronix model number ST3)

Specifications:
Input:
  • 16VAC to 28VAC.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3
You must be logged in to order this item. Log in here

OLS207 Power Supply

Item#:
OLS207
You must be logged in to order this item. Log in here

UL POWER DISTRIB UNIT W/CB dule - Converts AC or DC power

Item#:
PD4ULCB
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

SMP3E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5A continuous supply current. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.
  • Power supply/charger with enclosure.
  • Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries.

Specifications:
Input:
  • 6VDC or 12VDC output use TP1640 or 24VDC output use T2428100.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3E
You must be logged in to order this item. Log in here

Relay Module, 12/24VDC, DPDT Contacts @ 1A - 120VAC or 2A - 28VDC

RBSN relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

  • 12VDC or 24VDC operation.
  • Current draw: 15mA.
Contact Rating
  • 1A/120VAC or 2A/28VDC DPDT contacts.
Temperature
  • Operating -25ºC to 55ºC ( -13ºF to 131ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.
  • System AC input VA requirement:
  • 12VDC: 1.8VA.
  • 24VDC: 3.6VA.

Item#:
RBSN
You must be logged in to order this item. Log in here

Replacement Battery Pack

The console battery pack can be purchased separately for use with a GC2 Panel to extend battery life or to use as a replacement battery.

Features:

  • Optional extra capacity battery
  • Replaces standard internal Control Panel battery
  • Required for UL985 fire warning system listing
  • Nickel metal hydride (NiMH) battery

Item#:
2GIG-BATT2X
You must be logged in to order this item. Log in here

extra lge cabinet; 18" x 28" x 5", vented, key lockable, g

Item#:
BC-13
You must be logged in to order this item. Log in here
|◀ ◀ 13 - 24 of 431 ▶ ▶|
View:
(Denotes required field.)