OTHER IP DEVICES - Page 139 of 154

Compare

2-Port Industrial Outdoor Gigabit UPoE Extender

TRENDnet's 2-Port Industrial Outdoor Gigabit UPoE extender, model TI-EU120, takes a single UPoE connection and extends it an additional 100 meters (328 ft.) for up to two PoE+ devices. It auto-detects a PoE (15.4W), PoE+ (30W), or UPoE (60W) signal and extends it for a total distance of up to 200 meters (656 ft.) from the PoE source. Daisy chain up to 4 units for a total PoE network extension of up to 500 meters (1640 ft.). This outdoor UPoE extender features a single UPoE input port and two PoE+ output ports encased in an IP67 weather rated housing. Built-in voltage booster guarantees stable voltage output for your high powered PoE devices.

Easy installation
Extends 100m for a total distance of up to 200m (656 ft.)
Daisy chain up to 4 units for a total PoE network extension of up to 500m (1640 ft.) *
Use a single UPoE connection to extend PoE for up to two devices
Supports PoE (15.4W), PoE+ (30W), UPoE (60W) devices
Wide operating temperature range of -40°– 75° C (-40° – 167° F)
IP67 outdoor weather rated housing
No external power adapter required
Built-in True Surge 6kV Protection

Item#:

TI-EU120

You must be logged in to order this item. Log in here

Compare

USB Extender Cable (12m / 36 f eet)

Item#:

TU2-EX12

You must be logged in to order this item. Log in here

Compare

Dual 1G Fiber SFP, 4 port 10/100/1000 PoE/PoE+

Altronix NetWaySP4WPX Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and four (4) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

Input:

115VAC, 60 Hz, 2.5A or 230VAC, 50/60 Hz, 1.3A.

Power Output:

Four (4) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
120W total power.
Integral surge protection.

Fiber Port:

Two (2) Gigabit SFP ports.
Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).

Ethernet

Four (4) 10/100/1000 Mbps ports.
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5 or better structured cable.
Distance: up to 100m.
Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.

Battery Backup:

Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.

LEDs

Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.

LINQ Technology

Remote network management allows for camera/device reset and monitoring.
Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report real-time diagnostics.
Event log tracks history.

Item#:

NETWAYSP4WPX

You must be logged in to order this item. Log in here

Compare

Dual 1G Fiber SFP, 2 ports 10/100/1000 PoE/PoE+

Altronix NetWaySP8WPX Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and eight (8) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

Input:

115VAC, 60 Hz, 2.5A or 230VAC, 50/60 Hz, 1.3A.

Power Output:

Eight (8) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
115W total power.
Integral surge protection.

Fiber Port:

Two (2) Gigabit SFP ports.
Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).

Ethernet Ports:

Six (6) 10/100 Mbps and two (2) 10/100/1000 Mbps ports.
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5 or better structured cable.
Distance: up to 100m.
Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.

Back-up Battery:

Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.

Indicators (LED):

Individual PoE On LEDs for each port.
Individual IP Link status, 10/100Base-T/active LEDs for each port.
ALOS LED indicates fiber connection for SFP port.
Heartbeat LED indicates proper operation of the unit.

LINQ Technology:

Remote network management allows for camera/device reset and monitoring.
Provides local and/or remote access to critical information via LAN/WAN.
Email and Windows Dashboard Alert notifications report real-time diagnostics.
Event log tracks history.

Item#:

NETWAYSP8WPX

You must be logged in to order this item. Log in here