Altronix NetWaySP4P2 Fiber Optic Transceivers provide four (4) 1Gb SFP ports and four (4) power - limited ports for up to 60W per port to be transmitted over composite fiber (powered) cable (fiber + copper combined) to NetWay Spectrum PoE Hardened Switches. NetWaySP4P2 can be used for standard fiber cable applications as well.

• Input: 115VAC, 60Hz, 3.25A or 230VAC, 50/60Hz, 2A.
• Power:
  • Four (4) 56VDC power-limited outputs up to 60W max. full power per port.
  • Total power: 240W.
  • Short circuit protection.
• Fiber Port:
  • Four (4) Gigabit SFP ports.
  • Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).
• Ethernet
  • Four (4) ports to swtich.
  • Wire type: 4-pair CAT5e and higher.
  • Connectivity: RJ45, auto-crossover.
  • Speed: 10/100/1000Mbps.
  • Distance: up to 100m.
• Battery Backup
  • Built-in battery charger (optional rack mount battery enclosure - RE2).
  • Automatic switchover to stand-by battery when AC fails.

Altronix NetWaySP8WP Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and eight (8) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

• Input:
  • Voltage: 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
  • Fusing: 5A/250V.
• Power Output:
  • Maximum Power: Eight (8) PoE+ (30W) ports or two (2) Hi-PoE (60W) ports.
  • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
  • 115W total power.
  • Integral surge protection.
  • Fiber Ports: Two (2) Gigabit SFP ports.
• Ethernet Ports:
  • Six (6) 10/100 Mbps and two (2) 10/100/1000 Mbps ports.
  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5 or better structured cable.
  • Distance: up to 100m.
  • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
• Back-up Battery:
  • (not included)*
  • Type: Sealed lead acid or gel type.
  • Failover: Upon AC loss, instantaneous.
• Indicators (LED):
  • Individual PoE On LEDs for each port.
  • Individual IP Link status, 10/100Base-T/active LEDs for each port.
  • ALOS LED idicates fiber connection for SFP port.
  • Heartbeat LED indicates proper operation of the unit.
• LINQ Technology:
  • Remote network management allows for camera/device reset and monitoring.
  • Provides local and/or remote access to critical information via LAN/WAN.
  • Email and Windows Dashboard Alert notifications report real-time diagnostics.
  • Event log tracks history.