|◀ 1669 - 1680 of 1842 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Altronix NetWaySP3B Ethernet over Fiber PoE+ Hardened Switches provide a 1Gb SFP port and three (3) PoE+ (30W) ports or up to two (2) Hi-PoE (60W) ports, passing data and power to PoE/PoE+ compliant devices. Cameras/edge devices may be located up to 100m from the unit. Features also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control, and report power and diagnostics from anywhere.

  • Input: 48-55V UL Listed ITE power supply (up to 120W).
  • Power Output
    • Three (3) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
    • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
    • 120W total power.
    • Integral surge protection.
  • Fiber Port
    • One (1) Gigabit SFP port.
    • Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).
  • Ethernet
    • Three (3) 10/100/1000 Mbps ports.
    • Connectivity: RJ45, auto-crossover.
    • Wire type: 4-pair Cat-5 or better structured cable.
    • Distance: up to 100m.
    • Speed: 10/100/1000Mbps, half/full duplex, auto negotiation.
  • Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • Indicators (LED)
    • Individual PoE On LEDs for each port.
    • Individual IP Link status, 10/100Base-T/active LEDs for each port.
    • ALOS LED indicates fiber connection for SFP port.
    • Heartbeat LED indicates proper operation of the unit.
  • LINQ Technology
    • Remote network management allows for camera/device reset and monitoring.
    • Provides local and/or remote access to critical information via LAN/WAN.
    • Email and Windows Dashboard Alert notifications report real-time diagnostics.
    • Event log tracks history.

Item#:
NETWAYSP3B
You must be logged in to order this item. Log in here
The 5-Port Gigabit Long Range PoE+ Switch, model TPE-LG50, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points, VoIP phones, and IP Cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 32W PoE budget. Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for reliable high speed PoE networking. Its fanless design is perfect for quiet environments that require silent operation.
  • Easy installation
  • 4 x Gigabit PoE+ ports and 1 x Gigabit port
  • Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps
  • DIP switch supports VLAN port isolation and QoS
  • 10Gbps switching capacity
  • 32W PoE budget
  • Wall mountable design
  • Sturdy metal switch
  • Use with TRENDnet's PoE splitter to network and power non-PoE devices
Item#:
TPE-LG50
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
These 2-in-1 USB KVM cables are designed to connect a USB computer to the TRENDnet TK-803R and TK-1603R KVM switches. These cables consist of a USB keyboard/mouse cable and monitor cable bonded into a single device. These flexible, low profile cables come in lengths of 6, 10 and 15 feet.
  • Connect computers with VGA and USB ports to a TRENDnet TK-207K, TK-209K, TK-407K, TK-409K, TK-423K, TK-803R, TK-804R, TK-1603R or TK-1604R KVM switch
  • Length: 10 Ft.(3.1m)
Item#:
TK-CU10
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Altronix NetWayXTG PoE+ Gigabit repeater module interfaces with NetWay midspans to extend data (video) 100m. NetWayXTG is PoE/PoE+, IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant. A maximum range of more than 600m is possible using multiple repeaters, based on camera/device port requirement.
Data
  • Extends data an additional 100m for a total distance of 200m utilizing a single repeater
Ethernet
  • 1Gb (10/100/1000Mbps)
  • Connectivity: RJ45, auto-crossover
  • Wire type: 4-pair CAT5e or better structured cable
  • Speed: 10/100/1000 BaseT, half/full duplex, auto negotiation
Power
  • IEEE 802.3af (15W) and IEEE 802.3at (30W) compliant
  • Plug and play installation, no external power required
Indicators (LED)
  • Green LED: 1G, Blinking LED indicates activity
  • Yellow LED: 10/100, Blinking LED indicates activity
  • Blue LED: PoE/PoE+ Input present
Item#:
NETWAYXTG
You must be logged in to order this item. Log in here
|◀ 1669 - 1680 of 1842 ▶|
View:
(Denotes required field.)