Features:

• Best Solution for Powering USP Auto Dialers
• Includes 24hr Battery Back-up Unit
• Battery Trickle Charged by AC Adapter
• Kicks in Automatically When Main Power Goes Out
• Input: AC 120V 60hz 12 watts
• Output: DC 12V 500ma

New to the DSC family of wireless products, the WS4920 Wireless Repeater delivers an easy-to-install wireless device that significantly extends the range for DSC 1-way wireless devices from the control panel/receiver and compensates for interference sources by improving the signal quality. The WS4920 repeats the 1-way wireless devices signal to ensure high-quality signals are transmitted to the control panel/ receiver.

The WS4920 Wireless Repeater is ideal in both new and existing installations. In the past, occasionally the size of the building, layout or even materials of construction, required additional receivers or a wired system. Now with the WS4920 Wireless Repeater, up to four repeaters can be installed on one control panel.
Within existing installations, in some instances, the wireless signal from devices may be adversely affected by interference and noise sources, such as interference-generating electronics or changes to the existing layout or construction materials. The backward compatible WS4920 Wireless Repeater easily extends the range of 1-way wireless devices and can avoid costly

Features:

• Greatly extends the range of DSC 1-way wireless devices
• Compatible with IMPASSA
• Backward compatible with existing security systems including PowerSeries SCW9047, PowerSeries and MAXSYS
• WS4920 identifies the optimal location for mounting taking in to consideration noise and interference
• Quick enrolment of DSC 1-way wireless devices
• Status LEDs for AC, battery and RF Jam
• Up to four repeaters can be installed for each panel/receiver
• WS4920 supports up to 164 wireless devices
• Wall and case tamper protection
• Aesthetically pleasing design

Mounts on a narrow wheelchair seat area.

The PG9975 communicates with the security system to report openings and closings of doors and windows. The PGx975 contact is designed to be almost invisible after installation and blend within the décor.

The PG9975 PowerG Door/Window Contact is equipped with a visible signal quality LED indicator on the contact that lets the installer choose the optimal location for installation, without having to go back and forth to the keypad.

One of the smallest and most unobtrusive door/window contacts available, the PGx975 contact is housed within a compact casing that allows it to be used for thetightest-fitting installations or where aesthetics are critical. The slim case provides a streamlined, practically non-existent look once installed, complementing the décor of most homes.

Features:

• Wafer-thin profile
• Visible link quality indicator on device
• Fully supervised
• Includes double-sided tape
• Large transmission range enabling repeater-free installations
• Easy to install and remove
• Prolonged battery life (3 years with typical use)
• Dimensions: 62 x 25.4 x 7.7mm (2.45 x 1 x 0.3in

The Indoor Motion Sensor alarms when motion is sensed or when the external contact is opened. It is battery powered and requires no installation tools. A Pyroflex sensor with HighBar signal processing allows for industryleading pet immunity and catch performance.

• Industry-leading pet immunity and catch performance
• Supports both motion zone and an external contact zone
• Mountable on walls or in corners
• 5 year warranty

Tilt Sensor is a full-featured security transmitter typically used to sense the tilt of overhead garage doors and windows. It will alarm when the sensor is tilted more than 45 degrees.

• Triggers at approx. 45 degree tilt
• Monitors any lifting or tilting door, or equipment movement
• Mount vertically in non-alarm position
• Strong, reliable RF signal
• 10-15 year battery life on CR123A battery
• Low Battery indication
• 3.3 x 1.4 x 1.1 inches