Features:

• Soft white, compact and low profile
• Reversible mounting position for left or right handed operation
• Low battery clearly displayed at keypad by zone and transmitter number
• Both models include built-in reed switch, magnet, lithium battery, tamper and terminals

The GEM-GB is an advanced wireless acoustic glass-break detector for use with all Gemini-Series control panels and receivers. Each transmitter has a unique RF ID code (printed on the sensor module and on the rear case) that distinguishes itself to the receiver. Refer to control-panel instructions for entering this code and its checksum digit into the panel. Be sure to enter all numbers and/or letters, including leading zeros, if any. The detector is powered by two type DL123A 3-volt lithium batteries, which are factory installed. To energize the unit, simply install the supplied Power-Up Jumper across pins JP1 near the positive terminals of the batteries.

Features:

• Superior immunity to false alarms
• Excellent detection, even through blinds and light drapes
• 25 ft. radius
• Automatic test for easy installation
• Hand-clap test for sensor verification
• Includes lithium batteries

The GEM-KEYF is a multifunction pendant/keychain transmitter compatible with Napco GEM-Series wireless systems. It serves as an area arm/disarm device with two auxiliary functions, and may be used as a police panic and/or auxiliary emergency transmitter. A 3V Lithium coin cell battery (type CR2032) powers the GEM-KEYF transmitter. A flashing LED indication signals a low-battery warning to replace the unit.
The GEM-KEYF leaves the factory as a remote area arm/ disarm transmitter with two Auxiliary buttons, A1 and A2. Auxiliary functions are selected by programming Key Fob Transmitter Aux 1 and Aux 2 options: Panic, Auxiliary, or Instant protection. In addition, any of the panel's Relay Groups may be selected for controlling garage doors, exterior lighting, or other applications

The Inovonics single-button water-resistant pendant transmitter with single-button press-and-hold activation and compact design is ideal for assisted living installations.

Features:

• Can be worn in the shower, bathtub or rain
• Neck cord and belt clip included for easy conversion
• Fully supervised to help ensure reliability
• Weighs less than 1.3oz (40gm)
• Necklace and belt clip included

Features:

• Waterproof personal panic button.
• Worry-free peace of mind.
• 1-button operation with tactile feedback click.
• Extra-large, soft touch button for trouble-free use even by dexterity-impaired or arthritic hands.

The Inovonics EN1210W door/window transmitter with reed switch includes a built-in, side mounted magnetic reed switch, with a magnet that supports a 5/8in. gap.

Features:

• Contains wired input and magnetic reed switch input
• For use with almost any standard NO/NC contact
• Mounting bracket included for quick and easy installation
• Includes case tamper protection
• Fully supervised

Features:

• New super compact design, 2.5 x 1 x 0.4 (HxWxD inches)
• Tamper supervised
• Replaceable lithium PL2032 coin cell battery (supplied)
• 5-year battery life, typical
• Magnet and Internal reed switch
• External lead (24" mini connector pigtail) for wiring external devices (jumper-selectable)
• Magnet mounts with either supplied double-face tape or screws (screwtabs snap off mounting plate)