|◀ 301 - 312 of 464 ▶|
View:
You must be logged in to order this item. Log in here
Item#:
SNT00048B
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The ELK-319DG is a Supervised, Wireless Sensor uniquely designed for outdoor use on swing gates or doors. The sensor and magnet can be mounted using screws (included), pipe strap style clamps, or plastic wire ties. 
This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • All weather design
  • Ideal for pool areas and other outdoor gated spaces
  • Long range and battery life
  • Transmits open/close, tamper, low battery, and supervisory signals
  • Uses easy to find CR2032 batteries
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: Two (2) CR2032 3VDC lithium coin-cell 
  • Operating Temp Range: -40 to 140°F (-40 to 60°C)
  • Dimensions: Sensor 3.39" L x 1.34" W x 0.79" D, Magnet 2.36" L x 0.83" W x 0.8" D
Item#:
319DG
You must be logged in to order this item. Log in here

Mounts on floors, etc. Detects exit/entry or fallen patients

Item#:
P-8-22
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
This battery powered, two-way, wireless keypad can be placed anywhere in the home for easy arming and disarming. The E ink display provides high contrast viewing, ensuring easy visibility in variable light conditions.
  • Bluetooth Smart RF connection
  • Full status reporting
  • E-ink display
  • Innovative capacitative touch interface
  • 1-year battery with consumer replaceable batteries
Item#:
RE656
You must be logged in to order this item. Log in here

High-gain 3G/4G quad-band antenna with SMA male connector and 3 meter RG-174 cable. Uses a 16 gauge powder coated mount as its ground plane. This interior/exterior antenna is specifically designed and proven to out-perform standard factory antennas and boost the signal to TELGUARD TG-1 Express, Napco, UPLINK, IPDATATEL, DSC, and HONEYWELL type cellular communicators that accept a 50 ohm SMA male connector.

Specifications:

  • GAIN: 7dBi
  • VSWR: <1.5
  • IMPEDANCE: 50 ohms
  • CABLE: 3 meter RG-174 with SMA male connector
  • HARDWARE: Stainless steel screws and washers, drywall anchors and masonry anchors included

Item#:
SM-ANT
You must be logged in to order this item. Log in here
|◀ 301 - 312 of 464 ▶|
View:
(Denotes required field.)