• Enclosure: 4.75 in. x 2.25 in. (Diameter x Depth) Black, ABS plastic base with slip-resistant feet and 3 x AAA battery housing for optional audible message on button press Red, ABS plastic, spring-loaded push button
• Electronic Signaling: Battery-powered filter circuit with integrated 319.5 MHz (crystal-controlled) Interlogix-compatible transmitter with 64-minute supervisory interval
• Sensing Interface: Filtered, normally open (i.e. when not pressed), momentary contact switch
• Battery Life: Replaceable 3x AAA battery: 2+ years

The Inovonics single-button fixed position hold up transmitter features a rugged design with simple, single-button activation, and a back tamper for tamper protection.

Features:

• Easy single-button activation
• Include back tamper for secure fixed position alarm signaling
• LED flashes with all transmissions, ensuring operation at a glance
• UL listed

• Uses LTE cellular network for high-speed, reliable and low-cost communications to an IP receiver Automatically switches to 3G (HSPA/ HSPA+) if LTE service is not available
• Compatible with control panels that communicate using the Contact ID and SIA (300 baud) formats
• Full event reporting
• 2 on-board inputs
• 2 on-board outputs (open collector)
• Activation and initialization via website or mobile interface provided by C24 Communications
• View communicator status directly from your mobile phone to support on-site or remote troubleshooting
• PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
• SMS command & control for panel arm/disarm
• PTM call routing to direct cellular signals to multiple receivers based on dialed number
• Advanced carrier selection to secure a suitable cellular connection
• Two unique trouble display models
• Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
• Mobile Site for Easy Installation and Comprehensive Maintenance
• Advanced Panel Transmission Monitoring
• SMS Command & Control
• Input Voltage 13.8 Vdc
• Current Draw (without battery) 40 mA (standby) 180 mA (transmitting)
• The LE4000 has been listed by UL/ULC for Residential Fire and Burglary and UL/ULC Commercial Burglary installations.
• Dimensions 8.5" H x 4.9" W x 1.3" D (216mm x 124mm x 33mm)