S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8 Controls. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.
Includes:
- Output Expander - 8 Relays/8 Voltage Outputs
- ELK-SWG Circuit Board Mounting Glides 2/pack
- Relay Adapter, 12 Conductor Cable Assembly
- Instructions
- 8 Voltage Outputs
- 8 Single-Pole, Double-Pole Relay Outputs
- Operates on the 4-Wire Data Bus
- DIP Switch Address Settings
- Flash Memory for Firmware Updating
- One (1) - Twelve (12) Conductor "Flying Lead" Wire Harness
- Voltage Outputs may be converted to Relays using M1RB Relay Boards
- Status LED with Diagnostic Display
- Mounts in Enclosure using ELK-SWG Glides, SWP or SWP3 Structured Wire Plates, or Double Sided Foam Tape
- Voltage Outputs: 12 VDC @ 50 mA each
- Relay Outputs: SPDT rated for 7 Amps @ 28VDC, 10 Amps @ 125 VAC
- Wire Harness Length: 12"
- Operating Power Range: 9 to 14 VDC
- Current Draw: 65 mA Nom., 330 mA Max.
- Size: 6" x 3.25" x .75" H
- Hi-Contrast LCD Touchscreen Display
- Six (6) Programmable Function Keys
- Unique "Menu" Navigation
- Operates on 4-wire RS485 Data Bus
- Built-in Piezo Sounder with Adjustable Pitch
- One (1) Supervised Zone Input
- One (1) "Switched Positive" Voltage Output
- Screen Size: 3.5” Diag.
- Resolution: 320 x 240 pixels – Landscape
- Connection: 6 Pin Plug-in "Flying Lead" Cable
- Operating Voltage: 13.8 VDC
- Current draw: ~30mA Idle (Back light on low, sounder Silent.) ~ 55 mA fully active.Â
- Dimensions: 4.25" W x 3.38" H x .59" D
Features
- Up to 128 hardwired or wireless zones supported
- Modern, slim-line landscape keypad
- White backlit keys
- Blue LCD display
- 5 programmable function keys
- Input/Output terminal
- Fire, medical and panic keys
- Adjustable backlight and keypad buzzer
- Available with English function keys
- Proximity with MPT mini prox tags
The GEMC-BSLC-RLY "Non-Polarized" Single Point Relay Module is a low-current Form C relay interface accessory. The GEMC-BSLC-RLY provides a dry contact relay output for controlling bells, door latches, lights, strobes and other similar Burglary and Home Automation devices.
The GEMC-BSLC-RLY Relay Module connects onto the SLC Bus (polling loop terminalson the GEMC-BSLC board) along with such other accessories as GEMC-BSLC-1PT and GEMC-BSLC-4PT modules.
The GEMC-BSLC-RLY is easy to install--when wiring to the polling loop, the terminals (4 and 5) are non-polarized and so can be connected to either side of the SLC loop. Up to 88 GEMC-BSLC-RLY units may be used with any one Gemini C-Series control panel. Based on the available current the GEMC-BSLC provides, up to 44 GEMC-BSLC-RLY modules may be used with any one GEMC-BSLC.
The first 40 External Outputs (1-40) of the Gemini C-Series control panels are supervised Form C relay contacts (the position of the relay is supervised, but the external relay output wiring is not supervised for opens or shorts). Due to relay supervision, reporting and disabling options, we recommend these first 40 outputs be reserved for controlling Fire devices. Devices addressed as 41-88 are not supervised (do not have a local or remote trouble indication) and thus are for supplementary use only. For UL installations, the external device must be mounted no greater than 3 feet from the GEMC-BSLC-RLY module with no intervening walls or barriers. Refer to the control panel installation instructions for wiring requirements in UL-listed applications.
Features:
- Communication and operating power received from the control panel via the addressable polling loop
- Electronics enclosed within a easy to install plastic case
- Approved for Commercial Burglary and Residential Burglary installations. Note: For Commercial applications, the GEMC-BSLC-RLY module must be installed within a UL-Listed tamper-protected enclosure (i.e. GEMC-HSKIT12V-R, GEMCHSKIT12V-CF or CI-HSKIT12V UL Listed Enclosure Subassembly with GEMC-TAMPERKIT).
The ELK-M1EZ8MSI Main Serial Port Interface allows direct RS-232 Serial Communications to an M1EZ8 Control for Upload/Download programming, and for interfacing with other Computer type devices. Also required when adding the M1XEP Ethernet Port to an M1EZ8 Control. The speed of this port is software selectable from 300 to 115,200 baud.
Includes:
- M1EZ8 Main Serial Interface
- 4 pieces of Double Sided Tape
- Plastic Housing
- CAT5E Patch Cable Assembly
- Instructions
- Adds A High Speed RS-232 Serial Port To Any M1EZ8 Control
- Allows Computers And Other Serial Devices To Communicate With The M1EZ8 Control
- Self-Powered From The Control
- Modular Connectors For Long Term Reliability
- Powerline Lighting Pass-through Connector For PSC-05 (or equiv.) Interface
- Gold Plated RJ45 8-Wire Modular Connectors
- DB9F Female 9-Pin RS-232 Serial Connector
- Operating Voltage: 12 Volts D.C.
- Current Draw: Less Than 5mA
- Housing Dimensions: 4.375 in. x 3.0 in. x 1.125 in.
- Circuit Board Dimensions: 3.5 in. x 2.75 in.
The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.
Includes:
- M1 Ethernet Interface
- Plastic Housing
- 4 #6 Plastic Anchors
- 4 #6 Pan Head Sheet Metal Screws
- ELK-P1216 1.6A, 12Vdc Power Supply
- ELK-W040A DB9 Pin Serial Cable Assembly
- Instructions
- Secure connection with password protection and SSL/TLS encryption
- Flash Memory for Firmware Updating
- Event notification via E-Mail (SMTP)
- Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
- Supports Network Time Protocol for synchronizing the M1/EZ8's clock with an Internet time server.
- Internet Monitoring and Reporting Capability
- Network stack supporting the following protocols:
- TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
- Federal Information Processing Standards (FIPS) 128 bit encryption
- Integrated 802.3 compliant 10/100 Mbit network interface
- RS232, DB9M 9-pin serial port connection
- Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
- RJ45 8-pin Network Jack
- 2.1mm barrel type power connector (center positive)
- LED Indicators for Power, Link, and Data
- Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **
- Current Draw: approx. 300 mA
- Housing Dimensions: 4.25 in. x 6.375 in. x 2.125 in.
- Circuit Board Dimensions: 2.25 in. x 3.95 in.
- ELK-W040A Serial Ribbon Cable included
S2K Administration - Form Template Display
Actions