S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8 Controls. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.
Includes:
- Output Expander - 8 Relays/8 Voltage Outputs
- ELK-SWG Circuit Board Mounting Glides 2/pack
- Relay Adapter, 12 Conductor Cable Assembly
- Instructions
- 8 Voltage Outputs
- 8 Single-Pole, Double-Pole Relay Outputs
- Operates on the 4-Wire Data Bus
- DIP Switch Address Settings
- Flash Memory for Firmware Updating
- One (1) - Twelve (12) Conductor "Flying Lead" Wire Harness
- Voltage Outputs may be converted to Relays using M1RB Relay Boards
- Status LED with Diagnostic Display
- Mounts in Enclosure using ELK-SWG Glides, SWP or SWP3 Structured Wire Plates, or Double Sided Foam Tape
- Voltage Outputs: 12 VDC @ 50 mA each
- Relay Outputs: SPDT rated for 7 Amps @ 28VDC, 10 Amps @ 125 VAC
- Wire Harness Length: 12"
- Operating Power Range: 9 to 14 VDC
- Current Draw: 65 mA Nom., 330 mA Max.
- Size: 6" x 3.25" x .75" H
- Hi-Contrast LCD Touchscreen Display
- Six (6) Programmable Function Keys
- Unique "Menu" Navigation
- Operates on 4-wire RS485 Data Bus
- Built-in Piezo Sounder with Adjustable Pitch
- One (1) Supervised Zone Input
- One (1) "Switched Positive" Voltage Output
- Screen Size: 3.5” Diag.
- Resolution: 320 x 240 pixels – Landscape
- Connection: 6 Pin Plug-in "Flying Lead" Cable
- Operating Voltage: 13.8 VDC
- Current draw: ~30mA Idle (Back light on low, sounder Silent.) ~ 55 mA fully active.
- Dimensions: 4.25" W x 3.38" H x .59" D
Features
- Up to 128 hardwired or wireless zones supported
- Modern, slim-line landscape keypad
- White backlit keys
- Blue LCD display
- 5 programmable function keys
- Input/Output terminal
- Fire, medical and panic keys
- Adjustable backlight and keypad buzzer
- Available with English function keys
- Proximity with MPT mini prox tags
The ELK-M1XSLU is a dedicated Elk-M1 serial expander for connecting an M1 Control to a Lutron RadioRA2 Main Repeater. RadioRA2 is a wireless multi-room control system for Lights, Shades, and HVAC Thermostats. Interfacing a RadioRA2 system to an M1 allows control in response to security system actions or conditions. With the automation and remote capabilities built into M1 it is possible to control RadioRA2 devices from across the room or across the world. Benefits include energy savings, convenience, and comfort.
The M1XSLU should be mounted as close as possible to the RadioRA2 Main Repeater. An 18 inch 9-pin flat ribbon serial interconnect cable is provided.
Includes:
- M1 to Lutron RadioRA2 Serial Interface
- Plastic Housing
- ELK-W040A DB9 Pin Serial Cable Assembly
- 4 #6 Plastic Anchors
- 4 #6 Pan Head Sheet Metal Screws
- Instructions
- Activity/Status LED (Orange)
- Auto-Reset Hardware Watchdog Circuit
- Addressable (1-7) TYPE 5 Databus ID
- Connection to Main Repeater: RS232 Cable - Included
- Connection to M1: Elevator Screw Terminals (4)
- Operating Voltage: 12 Volts D.C.
- Current Draw: 31mA
- Housing Dimensions: 4.25 in. x 6.375 in. x 2.125 in.
- Circuit Board: 2.75 in. x 3.95 in.
S2K Administration - Form Template Display
Actions