S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Features:
Item#:
PC4116
You must be logged in to order this item.
Log in here
The ELK-M1PCSPIM is a special Powerline Interface Module containing a built-in M1XSP Serial Port chip. This all-in-one device makes it easy to permanently connect the ELK M1 Control to a UPB network. Simply locate a convenient unused AC Power Outlet, connect a cable from the M1 data bus to the four (4) terminals on the ELKM1 PCSPIM, and perform an M1 data bus enrollment. The long distance capability of the M1 data bus makes it possible to locate the ELKM1 PCSPIM virtually anywhere, without a lot of complex or ugly cabling or connections. UPB utilizes the AC wiring circuit for transmission, without new or additional wiring, and without radio frequency signals.
- All-in-one device for interfacing M1 with UPB.
- Compact interface requires small amount of space
- Easy hookup - requires only the 4-wire data bus connection. * NO 9-Pin Serial Cable *
- Includes UPB Status light (multicolored) AND a M1 Data Bus Status Light (Green) -- enhances the ability to diagnose and troubleshoot
- Lower cost than purchasing separate and M1XSP and PCSPIM products.
- Removable 4-pin terminal block connection
- Power:
- -UPB Network circuitry – powered from the AC "Primary" Line.
- -M1 Data Bus Device circuitry – powered (12VDC) from the M1 Data Bus (+) & (-) terminals.
- NOTE: Loss of AC primary power should not result in a missing data bus device trouble.
- Current Draw from M1: ~30mA @ 12 VDC
- M1 Bus Device Address: Preset at Address #7 [Requires bus module enrollment]
- Firmware required: 1.0.42 (std. firmware) or later
Item#:
M1PCSPIM
You must be logged in to order this item.
Log in here
The ELK-M1KP is an addressable LCD Keypad for M1 Controls. It features a 32 character, backlit display with adjustable intensity and extra large character fonts, improving readability. Six (6) function ("F") keys can be programmed to contact emergency services or perform tasks; such as, controlling lights, watering the lawn, closing or opening the garage door, etc. The ELK navigation keys easily guide you through the full list of automation tasks, programming, systems diagnostics, and more. An optional plug-in proximity reader is available allowing prox card or fob arming, disarming, door strike control, etc. The fold down door features magnetic closure and can be completely removed, if desired.
- Backlit, Large Character LCD Display, 16 x 2 lines
- Blue LCD Display
- Six (6) programmable function keys
- Unique Menu Navigation/Direction keys
- Adjustable volume for tones/chime
- Accepts Plug-in Proximity Reader (ELK-M1PR) or "External" 26 bit Wiegand Prox Reader
- Built-in Temperature Sensor
- Input for 1 Supervised Zone
- One Programmable "Switched Positive" Voltage Output
- Exit, Stay, Chime, and Bypass Keys
- Programmable display of time, date, & temperature
- Displays system diagnostics and settings
- Input Connection: 6 Pin Plug-In "Flying Lead" Connector (Included)
- Operating Voltage: 13.8 Volts DC
- Current Draw: 40-50mA Idle (low backlight, sound silent) 160mA fully active
- Color: White
- Size: 6.875" x 5.25" x 1.375"
Item#:
M1KPB
You must be logged in to order this item.
Log in here
May be plugged directly into an M1G, M1EZ8, M1XOV, or M1XOVR to convert the voltage outputs into SPDT relays rated for 7A @ 30 VDC, 10A @ 125 VAC.
- 8 Form "C" Relays, SPDT Dry Contact
- Heavy Duty Contact Rating
- Low Current Draw.
- Great For General Purpose Switching.
- Plug-in "Removable" Terminal Blocks
- LED Status Indicators on all 8 Relays
- Twelve (12) Conductor Plug-in Wire Harness
- Mounts in Enclosure using ELK-SWG Glides
- Diode Protection Across Relay Coil.
- Contact Ratings: 7 Amps @ 28 VDC, 10 Amps @ 125 VAC
- Wire Harness Length: 24"
- Operating Voltage: 12 Volts DC Nominal
- Current Draw: 0 mA idle, 250 mA Max.
- Size: 6" x 3.25" x .75" H
Item#:
M1RB
You must be logged in to order this item.
Log in here
This "Ready to Install" value package includes:
- M1EZ8 Control Board
- M1KP LCD Keypad
- UB12 12" Metal Enclosure
- 1250 5Ah Battery
- TRG1640 AC Transformer
- SP35 Interior Speaker
- RJSET Telco Jack & Cord
The M1EZ8 Security and Automation Control System combines security, energy management, and integrated control solutions to provide comfort, convenience and simplicity.
Security and Safety
M1EZ8 provides peace of mind with comprehensive detection and reporting capabilities to protect what matters most. Easy system expansion and support for wireless sensors ensure M1EZ8 is the right fit today and in the future.
Flexible and Integration Friendly
Choose the system that uses smart features like occupancy detection, environmental conditions and a built-in astronomical clock to manage and control lights, thermostats, water valves, garage doors, gates and more.
Convenient Interfaces
With timely access to information and simple, user-friendly interfaces, M1EZ8 keeps you informed and in control. It’s easy to access the system from anywhere with popular smart devices. No monthly fees required!
Specifications:
- Large zone capacity: 8 on-board zones expandable to 200
- Wireless capability: Up to 144 zones; supports multiple wireless receivers for increased coverage area
- 12 On-Board Outputs: 1 siren driver/voltage, 1 form “C” Relay, and 10 low current (10 mA) voltage outputs
Item#:
M1EZ8KB
You must be logged in to order this item.
Log in here
For easy connection of expanders & keypads. The M1DBH accepts up to 9, RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units may be interconnected if more than 9 data lines are required.
- Designed For Multiple Home Run Cables
- Internally Connects Data A & B Lines From Previous Device In to Next Device Out
- Provides up to Nine (9) Data Bus Connections
- Multiple Hubs May be Connected for Expansion
- EOL Bus Termination Can Be Done On-Board, RJ45 Terminating Resistor Plug Included
- Mounting Plate for Structured Wire Boxes
- Input Connections: Elevator Screw Terminals
- Output Connections: RJ 45 8-Pin Jacks
- Mounting Plate Dimensions: 6.5" x 3" x .5"
- Circuit Board Dimensions: 5" x 2.5"
Item#:
M1DBH
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)