|◀ ◀ 1 - 12 of 433 ▶ ▶|
View:

PowerSeries Pro 2Amp Power Supply with Bus Repeater, HS65WPS NA Power Adaptor

  • The HSM3204CX provides an additional 12 VDC, 2 amps of current along with 4 programmable Form C relay outputs
  • Each module extends the bus up to 4000 feet. Four modules may be connected together in series for a total of 14,000 feet
  • Uses HS65WPSNA Power Supply adapter
  • Connect up to 1/8 modules per system
  • Provides enhanced diagnostics information for simpler diagnostics
Item#:
HSM3204CX NA
You must be logged in to order this item. Log in here

Linear Power Supply/Charger

Altronix AL100UL linear power supply/charger converts a low voltage input into a 12VDC output.

Specifications:
Input:

  • 16.5VAC, 20VA from UL Listed, Class 2 transformer (sold separately).
Output:
  • 12VDC output.
  • 750mA supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Low battery disconnect prevents batteries from deep discharge.
Supervision:
  • AC fail supervision (form C contacts).
  • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating 0 to 49° C (32 to 120° F )
  • Storage - 20 to 70° C ( -4 to 158° F)
  • Relative Humidity 85% +/- 5%
  • BTU/Hr. (approx.): 5 BTU/Hr.
  • System AC input VA requirement: 26.45VA.
Enclosure:
  • Wall mount enclosure for indoor use.
  • Accommodates up to two (2) 12VDC/4AH Batteries.
  • Dimensions 7.5 in. W x 8.5 in. H x 3.5 in. D (191 mm W x 216 mm H x 89 mm D).
  • 1/2 inch and 3/4 inch combination knockouts.
Weights (approximate):
  • Product Weight: 6.4 Lbs. (2.9 kg).
  • Shipping Weight: 6.9 Lbs. (3.13 kg).

Item#:
AL100UL
You must be logged in to order this item. Log in here

POWER CORD 3 CONDUCTOR 3 FEET

Item#:
AK500/14-OE-5-1
You must be logged in to order this item. Log in here

PowerSeries Pro 3Amp Power Supply with HS65WPSNA Power Adaptor

  • The HSM3350 provides an additional 12 VDC, 3 amps of power
  • Dual battery backups individually supervised
  • Uses HS65WPSNA Power Supply adapter
  • Connect up to 3/4 modules per system
  • Provides enhanced diagnostics information for simpler diagnostics
Item#:
HSM3350 NA
You must be logged in to order this item. Log in here

AL400UL UL PS W/LARGE GRY CABT 4 amp or 24VDC @ 3 amp, AC &

Input

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision
  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts).
Visual Indicators
  • AC input, DC outputand Battery LED indicators.
Item#:
AL400ULX
You must be logged in to order this item. Log in here

Mounting Magnets 24 Pack; incl 24) Quantity per Pack

Item#:
MM24
You must be logged in to order this item. Log in here

Power Supply Charger, Single Class 2 Output, 12/24VDC @ 4A, 115VAC, Board

Altronix AL400ULXB2 UL Listed Sub-Assembly power supply/charger converts a 115VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.
This product replace AL4000ULXB

Specifications:
Input:

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output:
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision:
  • AC fail supervision (form C contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form C contacts).
  • Battery presence supervision (form C contacts).
Visual Indicators:
  • AC input, DC outputand Battery LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.):
      • 12VDC: 25 BTU/Hr.
      • 24VDC: 37 BTU/Hr.
  • System AC input VA requirement: 402.5VA.

Item#:
AL400ULXB2
You must be logged in to order this item. Log in here

Linear Power Supply Charger, Single Class 2 Output, 6/12/24VDC @ 1.2A

Altronix AL624 power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC output. This general purpose power supply has a wide range of applications for access control, security, and CCTV system accessories that require additional power.

Specifications:

  • Switch selectable 6VDC-12VDC-24VDC.
  • 6VDC or 12VDC @ 1.2 amp supply current or 24VDC @ .75 amp supply current.
  • Input 16VAC to 24VAC, 20VA to 40VA.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current 300mA.
  • Automatic switchover to stand-by battery when AC fails (zero voltage drop).
  • PTC battery protection.
  • AC input and DC output LEDs.
  • Extremely compact design.
  • Includes battery leads.

Item#:
AL624
You must be logged in to order this item. Log in here

Replacement Power Supply

Features:

  • High efficiency switching power supply
  • 120 VAC @ 60 Hz input
  • 14 VDC @ 1700 mA output
  • Screw terminals for wiring connecting to the Control Panel
  • Includes retaining bracket for standard and Decora style outlets
  • For use with GC2 or GC3 panels.

Item#:
2GIG-AC1
You must be logged in to order this item. Log in here

High Current Power Distribution to 9 Devices (400mA ea)

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a single Master Power On/Off Switch. The modules accept a 6 to 30 Volt A.C. or D.C. power source (not included) which connects either to the input terminal block or the 2.1mm D.C. power jack located on the module. Two or more outputs can be paralleled for additional current.
  • Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
  • Master Power On/Off Switch.
  • Visual LED Power Indicators on each Output.
  • Convenient Test Points for measuring Total Current Draw.
  • Lifetime Limited Warranty.
  • Paintable White Plastic
  • Max Current Draw: 400mA from each output.
  • Max Combined Current Draw: Not to exceed Input Power Source
  • Input/Output Voltage: 6 to 30 Volts AC or DC
  • Input Connection:Screw Terminals or 2.1mm Plug-In DC Jack
  • Output Connection:Screw terminals (POS and NEG) for each output
  • Enclosure Size:6.5" x 4.3" x 2"
Item#:
PD9HC
You must be logged in to order this item. Log in here

POWER SUPPLY PLUG IN 12VDC 1.0 AMP

Item#:
PEAKPA10A
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Specifications:
Input:

  • 16VDC from TP1640 plug-in transformer.
Output:
  • 6VDC or 12VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 276VA.

Item#:
SMP3ET
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 433 ▶ ▶|
View:
(Denotes required field.)