Home  >  INTRUSION  > (x)
|◀ 529 - 540 of 8115 ▶|
View:
You must be logged in to order this item. Log in here
  • Industry-leading wireless range and battery life
  • Wide magnetic gap distance
  • Two built-in external contact zones
  • Secure encrypted wireless transmissions
  • IP67 waterproof enclosure rating
  • 5-year warranty
Item#:
RE207
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The 2GIG 4Button Keyfob Remote communicates with the 2GIG Control Panel on the 345 MHz frequency. It gives users the ability to turn the security system ON and OFF before entering the home or after exiting. If there is an emergency, you can turn on the siren and automatically call the central monitoring station. Keyfobs can be programmed to operate the programmable output in the Control Panel. Use with the 2GIG Universal Garage Door Receiver (2GIGGDR1345) to open a garage door. The keyfob is a lithium coin batterypowered, wireless keyfob designed to fit on a key chain, in a pocket, or in a purse.

Features:

  • Arms system in STAY or AWAY mode
  • Disarms system
  • Auxiliary output and emergency functions
  • Lithium coin battery with 5 years life

Item#:
2GIG-KEY2-345
You must be logged in to order this item. Log in here
The 2GIG Wireless Keypad is a wallmounted unit designed for use as a secondary keypad for the 2GIG security system.
  • Arms system in STAY or AWAY mode
  • Disarms system
  • Fire and Panic emergency functions
  • Lithium batteries
  • Transmits 345 MHz
  • ETL listed
Item#:
2GIG-PAD1-345
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Tri-Mode environmental sensing:
    • Flood, high and low temp
    • Freeze – for furnace failure – Under 45 degrees F
    • Overheat – for furnace runaway or air conditioning failure – Over 100 Degrees F
  • 3 unique wireless IDs or Loops: one for each function
  • Cover and wall tamper.
  • 3-5x more range than competing "puck" style sensors.
  • 8-10 year battery life on CR2032 battery.
  • IP67 waterproof rating
  • 2.43 x 2.48 x 1.17 inches
Item#:
RE118
You must be logged in to order this item. Log in here
KEYPAD FEATURES:
• Full color easy-to-use touchscreen interface
• One-touch Home and Emergency navigation
• Access to all Z-Wave functionality
• Firmware upgradeable using all current firmware tools
• Screen and buttons darken completely when not in use
and wake with a simple touch
Item#:
2GIG-TS2-E
You must be logged in to order this item. Log in here
The PG9985 is a fully supervised two-way wireless PowerG flood detector consisting of a probe connected to the device via a 1.8m (6ft) cable. The PG9985 senses the presence of water prompting advance warning of potential flooding. The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height. In the event that there is a water leak, the probe will detect the moisture and deliver the information to the transmitter.

The PG9985 PowerG Flood Detector is equipped with a visible link quality LED indicator that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad.
The flood probe of the PG9985 is also supervised to provide an alert upon a probe disconnection. This enhanced feature ensures that the device probe will be operational when it matters most.

Features
  • Visible signal quality shown on the device
  • Fully supervised
  • 6 foot wire water probe
  • Visible and transmitted low battery indication
  • Prolonged battery life (8 years with typical use)
  • Dimensions: 81 x 34 x 25mm (3.19 x 1.25 x 1in)
  • Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
Item#:
PG9985
You must be logged in to order this item. Log in here

A bulky home security system can be an eyesore. Adding to that stress is hard wire installation permanently altering the aesthetics of a room, door or window treatment. With its wireless connectivity and fully concealed platform, however, the Ion Security Plunger is a door security sensor that finally eliminates these pesky inconveniences.

Features:

  • Dimensions: 0.33 in. deep x 0.75 in. diameter
  • Fully concealed in wood door frame
  • Compatible with all DSC, GE, HAI and 2GIG Wireless receivers
  • 500 ft open air wireless transmit range
  • Long-life Battery  5+ years (avg)

Item#:
PLUNGER-G
You must be logged in to order this item. Log in here

The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.
Includes:

  • M1 Ethernet Interface
  • Plastic Housing
  • 4 #6 Plastic Anchors
  • 4 #6 Pan Head Sheet Metal Screws
  • ELK-P1216 1.6A, 12Vdc Power Supply
  • ELK-W040A DB9 Pin Serial Cable Assembly
  • Instructions
Features:
  • Secure connection with password protection and SSL/TLS encryption
  • Flash Memory for Firmware Updating
  • Event notification via E-Mail (SMTP)
  • Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
  • Supports Network Time Protocol for synchronizing the M1/EZ8's clock with an Internet time server.
  • Internet Monitoring and Reporting Capability
  • Network stack supporting the following protocols:
    • TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
  • Federal Information Processing Standards (FIPS) 128 bit encryption
  • Integrated 802.3 compliant 10/100 Mbit network interface
  • RS232, DB9M 9-pin serial port connection
  • Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
  • RJ45 8-pin Network Jack
  • 2.1mm barrel type power connector (center positive)
  • LED Indicators for Power, Link, and Data
Specifications:
  • Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **
  • Current Draw: approx. 300 mA
  • Housing Dimensions: 4.25 in. x 6.375 in. x 2.125 in.
  • Circuit Board Dimensions: 2.25 in. x 3.95 in.
  • ELK-W040A Serial Ribbon Cable included
Item#:
M1XEP
You must be logged in to order this item. Log in here
  • Support for 5 button functions
  • Low battery indication
Item#:
RE100-5
You must be logged in to order this item. Log in here
|◀ 529 - 540 of 8115 ▶|
View:
(Denotes required field.)