S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
The 2GIG CO8/CO8e is a wireless carbon monoxide detector. Consisting of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter, the detector communicates with the security panel and can send alarm, tamper and battery condition messages.
Features
- 10 year sensor life
- 10 year battery life
- Built-in 85 decibel sounder
- 3v battery powered
- Tamper protected case
- Full monitoring of alarm, low battery, and tamper conditions
- End-of-life detector
- Lithium battery
- ETL listed
Model Number: 2GIGCO8e345 (eSeries with encrypted signal)
Model Number: 2GIGCO8345 (non-encrypted signal)
- Detects whether door is open or closed
- Receive a text message if the garage is left open when you leave your house
- Sensor: 2.5"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air.
- Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
- UL2034 and CSA 6.19-01 listed
- Detects carbon monoxide
- 5-year warranty
- Expansion Card that plugs into the Connect+ Panel
- Provides communications with Z-Wave devices enabling a broad range of home automation features
- Enables system to receive signals from Honeywell, 2GIG, GE, Napco & DSC sensors
- All sensor alarm, supervisory and trouble signals are reported
- Dual antennas for reliable rangeĀ
The PG9929 Wireless PowerG 4-button key is a wireless key with a slim design which combines easy management of the security system with the added confidence of personal portable protection. The modern, compact key lets users easily arm/disarm the system as they approach the building or call for help when in close proximity to or inside the building.
The PG9929 Wireless PowerG key provides both visual and audible verification of the successful execution of any requested commands. The dual confirmation that the message has been executed by the security system offers peace of mind to users.
The PG9929 can also be used to provide system information back to the user. For instance, if a system trouble event is present, the PG9929 will provide notification to the user via the onboard message LED.
Features:
- 4 programmable function keys
- Visual and audible indicator to acknowledge requested action
- Full 3-seconds delay on panic function to reduce false alarms
- Visible signal quality indication shown on the device
- Prolonged battery life (5 years with typical use)
- Dimensions: 60 x 34.5 x 12.5mm (2.3 x 1.3 x 0.5in)
- Industry-leading wireless range and battery life
- Wide magnetic gap distance
- Two built-in external contact zones
- Secure encrypted wireless transmissions
- IP67 waterproof enclosure rating
- 5-year warranty
Housing Dimensions 4.1 x 2.3 x 1.0 inches (10.6 x 6.0 x 2.6 centimeters)
Weight with Battery 2.75 ounces (78 grams)
Mounting Fasteners #6 screws, anchors, VHB tape (all provided)
Environmental
Operating temperature 32°F to 120°F (0°C to 49°C)
Maximum humidity 85% non-condensing relative humidity
Device Specifications
Frequency 433.92 MHz
Replacement Battery One Panasonic® CR123A
Nominal Battery Life 3.5 years
Battery Voltage 3.0 VDC (Nominal), 2.2 VDC (Low)
Current Draw 30 mA (Maximum), 50 uA (Quiescent)
Transmitted Indications Low Battery, Tamper, Supervision, Alarm
Certification RE629 FCC, IC