RB30 relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

• 12VDC or 24VDC operation.
• Current draw: 95mA

• Transmits power at the full FCC limits, maximizing range
• Support for an external contact
• 1-inch magnet gap
• cover tamper
• 6+ year battery life

The PG9984P Wireless PowerG Dual Technology Motion detector combines advanced PIR detection algorithms with K-band microwave detection to dramatically reduce false alarm events even in harsh installations. The PG9984P sends an alarm signal after both the PIR and the microwave sensors have detected an intruder, significantly reducing false alarms.

The PG9984P uses a combination of elliptical parabolic mirror optics. An innovative mirror with extremely high optical gain delivers an extended range and provides superior detection sensitivity.
The PG9984P also applies a digital temperature compensation that allows the detector to continuously adjust its sensitivity according to the location temperature. In this way, the PG9984P is able to detect an intruder even when the ambient temperature is close to that one of the human body.
Finally, the PG9984P uses an obsidian black mirror technology. A unique, nickel-based, obsidian-like, reflective surface acts as a selective optical filter of infrared energy. In this way, the PG9984P can virtually eliminate white light interference and increase detection sensitivity.

Features:

• Visible link quality indicator on device
• Vandal-resistant design
• Dual Technology PIR and K-Band Microwave frequency to reduce false alarms
• Dimensions: 115 x 60 x 48mm (4.5 x 2.3 x 1.9in)

The IQ Carbon is a monitored detector ensures your home stays safe from dangerous invisible carbon monoxide gas. Connecting directly to the IQ panel, this device is operating 24-7, whether your system is armed or not, and can inform you if any danger is present in your home.

• Especially useful in homes with high risk of carbon monoxide leaks from appliances such as stoves, furnaces, and more.
• Monitoring for carbon monoxide gas 24-7
• Test button to ensure device is operating correctly
• Built-in alarm sounds in addition to panel siren
• Causes panel to emit fire tone and alerts monitoring station of carbon monoxide
• Power Source: One 3-volt CR123A Panasonic Lithium Battery (included)
• Audible Signal (temp 4 tone): 85 dBA min. in alarm (at 10ft (3m))
• Operating Current: 10 μA
• Temperature Range: 40°F (4.4°C) to 100°F (37.8°C)
• Operating Humidity Range: 15% to 95% Relative Humidity, non-condensing
• Pending Agency Listings: UL standard 2075, UL 2034 and CSA 6.19-01

Features

• Durable, scratch-resistant buttons
• 4 programmable function keys
• Long-life lithium batteries included
• Full 3-second delay on panic alarm to reduce false alarms
• Multifunction belt clip included
• Reliable 433 MHz technology
• Optional generic rubber insert included
• Water resistant

Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.
Includes:

• 16 Zone Input Expander
• ELK-SWG Circuit Board Mounting Glides 2/pack
• 18 2200 Ohm Resistors
• Instructions