The Super Switch is 2GIGs wireless takeover module. This unit was designed to convert 8 hardwired zones into eight wireless zones, make installation simple, and work with existing 12volt control panels. The module is to be mounted next to the existing Control Panel where the hardwired zones are connected. All of the zones on the Super Switch act as supervised wireless zones.

Features:

• Converts hardwired loops into as many as 8 wireless zones
• Converts 8 zones per module (additional modules may be added)
• Operates at 9-16 VDC, 50 mA
• Can be powered by and use backup battery of an existing 3rd party Control Panel
• ETL Listed

The PG9994 is an innovative 2-way wireless outdoor PIR motion detector that comprehensively addresses property owners' security needs for accurate intruder detection with minimum false alarms. The PG9994 features several innovative technologies to overcome demanding outdoor challenges such as rain, direct sunlight, animals, changes of light levels and more. The revolutionary Octa-Quad technology, which uses eight PIR sensors, each acting as a Quad detector, enables the PG9994 to accurately and reliably determine whether an alarm is justified.

The PG9994 uses a combination of elliptical parabolic mirror optics. An innovative mirror with extremely high optical gain delivers an extended range and provides superior detection sensitivity.
The PG9994 also applies an advanced motion analysis. A central motion processor analyzes the motion signals detected in each of the individual detectors, taking into account the time, amplitude, background temperature, speed of motion, size of target, and the direction of motion. Then, it compares the signals in relation to adjacent detectors and calculates whether a real alarm is justified based on true motion detected consecutively by the array of individual detectors.
Finally, the PG9994 uses an obsidian black mirror technology. A unique, nickel-based, obsidian-like, reflective surface acts as a selective optical filter of infrared energy. In this way, the PG9994 can virtually eliminate white light interference and increase detection sensitivity.

Features:

• Visible link quality indicator on device
• inimizes false alarms while ensuring effective detection of real threats
• Octa-Quad Technology
• Vandal-resistant design
• Black mirror optics for exceptionally high immunity to false alarms
• Prolonged battery life (3 years with typical use)

Napco NetLink Module, NL-MOD, will allow Napco Gemini Panels, from the P816 thru the X255, to fully, securely communicate alarms, status, supervisories, etc., pinpointed by zone over the internet to the central stations PC running NL-CSRCV Central Station application software or NetLink TCP/IP UL Receiver(s) NL-RCV-RMPCUL, below), using secure, NIST/AES 128bit encryption. At the central monitoring office, the panel module source is immediately received, authenticated as a valid account, and its alarm reports decoded and sent to awaiting CS operators for disposition. (NLMOD is initially set using NL-MODCONFIG, a download software utility for programming/configuring the panel module.)

Key Differentiating Features:

• Industry-leading PowerG wireless technology
• Connect siren, strobe and 4 PGMs for a full range of applications
• Enhanced security is enabled by the double end-of-line programming, tamper protection (including back tamper) and the integrated power supply supervision
• 2 Auxiliary independent power circuits
• 24-hour back up battery is safely stored inside the plastic cabinet
• Use your favorite hardwired device from any hardwired portfolio and incorporate it into the PowerG ecosystem
• Compatible with the Qolsys IQ2 panel+
• Use up to 2 modules per panel

Support for:

• Up to 18 conventional 2-wire smoke detectors
• CO detectors, 4-wire smoke detectors
• Siren output (Supervised) 12V @ 700mA
  
  

Power G wireless technology:

• 128-bit AES encryption -superior, military-grade encryption quality
• Two-way TDMA communication -enhanced communication reliability & resistance to jamming
• Long range wireless communication -4x range vs. traditional wireless
• Easy to install & enroll
  
  

Size:

• 8.9”x10”x3”

The ELK-100 Siren Driver is a great choice for residential and commercial security installations. It draws less current than most siren drivers, and offers two volume levels (example: one indoor, the other outdoor) simultaneously. Our exclusive MilliMiser option allows further reduction of current draw for controls that have limited alarm or auxiliary output power. The ELK-100 has two inputs, Yelp & Steady. The Steady sound overrides the Yelp. The Yelp input has our unique ComboTrigger feature, especially designed for controls that have a single alarm output with a pulsing option for fire or burglary. When pulsed, this channel produces a distinctive third sound pattern.
Includes:

• ELK-100 Siren Driver
• Double Sided Foam Mounting Tape
• Instructions