Home  >  INTRUSION  > (x)
|◀ ◀ 541 - 552 of 8454 ▶ ▶|
View:

Metal Latching Hold Up-Switch

The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch.
When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the HUSK-20, use the key provided. The housing is made of metal and is painted gray.
The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a burglar control panel. That signal in turn will send the immediate signal to police or central station.

Features:

  • Form C contact
  • Metal housing
  • Key reset
  • Silent operation
  • Status window indicator (armed, alarmed)
  • Mechanical operation
  • Terminals for easy wiring

Item#:
4370038
You must be logged in to order this item. Log in here

KEY RESET F/ HUSK-20 LATCHING HOLD-UP SWITCH

Item#:
4370039
You must be logged in to order this item. Log in here

Compact Interior Self Contained Echo Siren

The ELK-74 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo Series siren is designed to be heard but not seen! Sound "echoes" off mounting surface from back plate edge.
This unique contemporary siren has a smooth, paintable, "no grill" surface that easily blends with any decor. This siren mounts to any flat surface or single gang electrical "J" box. Also available is the ELK-71.
Includes:

  • Compact Echo Siren
  • (4) Plastic Anchors
  • (4) #6 pan head sheet metal screws
  • Instructions
Features:
    • Pre-Wired for easy Installation
      • May be Painted or Wallpapered
        • Mounting Hardware Included
          • Lifetime Limited Warranty
            Specifications:
              • Operating Voltage: 6 - 14 Volts DC
                • Sound Level: 100 db @ 1 meter, 13.8vdc
                  • Current Draw: 480mA @ 13.8vdc
                    • Size: 4.56 H x 4.3 W x 1.875 inch D
                      • Color: White

                      Item#:
                      74
                      You must be logged in to order this item. Log in here

                      Relay; SPDT, 12V

                      The ELK-912 is a high quality 12 Volt DC relay with SPDT (Form "C") dry contacts. It features low current draw, positive or negative activation, and is ideal for general purpose switching of devices or high current loads. Also available in a 12 pack (ELK-91212) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.
                      • Low Current Draw
                      • Positive Or Negative Activation
                      • Form "C" Dry Contacts
                      • Elevator Style Screw Terminals
                      • Great For General Purpose Switching
                      • Small, Compact Size
                      • Double Sided Foam Tape Provided For Mounting
                      • Packaged in Reusable Poly Storage Box
                      • Operating Voltage: 12 Volts DC
                      • Current Draw: 30mA (relay on)
                      • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
                      • Min. Pull-in Voltage: 9 VDC
                      • Size: 1.1" X 1.55" (28mm X 39mm) Ea.
                      Item#:
                      912
                      You must be logged in to order this item. Log in here

                      Interior 20 Watt Echo Speaker

                      The ELK-70 is a 20 Watt, 8 Ohm Speaker mounted in an attractive surface mount plastic enclosure. This versatile Echo Series speaker is designed to be heard but not seen. Sound "echoes" off mounting surface from back plate edge.
                      This unique contemporary speaker has a smooth, paintable, "no grill" surface that easily blends with any decor. This speaker mounts to any flat surface or single gang electrical "J" box. Also available is the ELK-73, a compact version of the ELK-70.
                      Includes:

                      • Echo Speaker
                      • (4) Plastic Anchors
                      • (4) #6 pan head sheet metal screws
                      Features:
                      • Pre-Wired for easy Installation
                      • May be Painted or Wallpapered
                      • Mounting Hardware Included
                      • Lifetime Limited Warranty
                      Specifications:
                      • Impedance: 8 Ohms
                      • Rating: 20 Watts Nominal
                      • Frequency Response: 500 to 7000 Hz
                      • Size: 4.375 H x 6.375 W x 1.875 inch D
                      Item#:
                      70
                      You must be logged in to order this item. Log in here

                      SW SET, MINI ALUM CASE W/18" ACKETED CABLE CLOSED LOOP

                      Item#:
                      4460
                      You must be logged in to order this item. Log in here

                      Relay Module SPDT 12 VDC, Big Terminals

                      The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form "C" contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.
                      Includes:

                      • (1) ELK-912B Relay
                      • 2 pieces of Double Sided Mounting Tape
                      • Instructions
                      Features:
                      • High Quality Cross-head Terminals
                      • 12 or 24 Vdc Selectable Operation
                      • Low Current Draw
                      • Voltage Input LED
                      • Form "C" Dry Contacts
                      • Great For General Purpose Switching
                      • Small, Compact Size
                      • Double Sided Foam Tape Provided For Mounting
                      • Packaged in Reusable Poly Storage Box
                      • Lifetime Limited Warranty
                      Specifications:
                      • Operating Voltage: 12 or 24 Volts DC Nominal
                      • Current Draw: 35mA, triggered (relay on)
                      • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
                      • Min. Pull-in Voltage: 9VDC on 12V setting, 19VDC on 24V setting
                      • Size: 2 in. X 1.5 in. (51mm X 38mm) Ea
                      Item#:
                      912B
                      You must be logged in to order this item. Log in here

                      SW SET, IND WIDE GAP ALUM SPST UP TO 3" GAP 3' ARMORED CABLE

                      Item#:
                      4400-A
                      You must be logged in to order this item. Log in here

                      JascoPro In-Wall Add-On Switch , White and Light Almond Paddl

                      Item#:
                      76600
                      You must be logged in to order this item. Log in here

                      Jasco Z-Wave Plus In-Wall Smar t Switch, White and Light Almo

                      Item#:
                      76596
                      You must be logged in to order this item. Log in here

                      Timer, Multi-Purpose, 12/24VDC 1 Second to 60 Minutes, Board

                      6062 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher.

                      Features:

                      • Triggers via positive DC (+) voltage, dry contact closure, or removal of contact closure.
                      • Quick and extremely accurate time range adjustment from 1 second to 60 minutes.
                      • Built-in reset feature which cancels timing cycle.
                      • Repeat (flasher/pulse) mode.

                      Input
                      • 12VDC or 24VDC operation is selectable.
                      Current Draw
                      • Stand-by: 3mA, Relay energized: 40mA.
                      Relay
                      • Selectable relay activation at the start or end of the timing cycle.
                      • One (1) second momentary relay activation at the end of the timing cycle (eliminates the need to use two (2) timers for this function).
                      Visual Indicators
                      • LED indicates relay is energized
                      Electrical
                      • Temperature:
                        • Operating: 0° C to 49° C (32° F to 120° F).
                        • Storage: - 20° C to 70° C ( - 4° F to 158° F).
                      • Relative Humidity 85% +/- 5%.

                      Item#:
                      6062
                      You must be logged in to order this item. Log in here

                      Delay Timer Relay, 12/24V, 1 Sec. - 60 Min.

                      The ELK-960 Delay Timer is designed to be an economical and flexible solution for any general-purpose timer application. The unit can be configured for use on 12 to 24V systems, with positive or negative trigger logic. Positive triggers can be as low as 4.5V. Setup is quick and easy with thumbwheel adjustment between 1 and 60 seconds. A quick jumper setting converts the time from seconds to minutes. The Timer can be configured to activate once for each trigger, or free-run as soon as power is applied. Relay can be configured to be normally on or normally off.
                      • 12 to 24 Volt DC Operation
                      • Adjustable Time Delay
                      • SPDT (Form "C") Relay
                      • Low Current Input Trigger (<1ma)
                      • Selectable Positive or Negative trigger
                      • Selectable Initial Relay State: ON / OFF
                      • Operating Modes: One-Shot or Repeat
                      • LED Indication of Relay State
                      • Operating Voltage: 12 to 24 Volts DC.
                      • Current Draw: 40 mA DC with relay on.
                      • Time Settings: 1 to 60 Seconds or 1 to 60 Minutes.
                      • Relay Contacts: Form "C", 7A @ 30VDC, 10 A @ 125VAC.
                      • Size: 3" x 2.2" x 1" (Fits Standard. Snap Track).
                      • Trigger Voltage: 4.5 - 24VDC.
                      Item#:
                      960
                      You must be logged in to order this item. Log in here
                      |◀ ◀ 541 - 552 of 8454 ▶ ▶|
                      View:
                      (Denotes required field.)