Home  >  INTRUSION  > (x)
|◀ ◀ 37 - 48 of 8409 ▶ ▶|
View:

35 Ft. Low loss cable for TG-1B, TG-4, TG-7 series

Item#:
ACD-35
You must be logged in to order this item. Log in here

Power Supply Charger, Single Class 2 Output, 12/24VDC @ 4A, 115VAC, Board

Altronix AL400ULXB2 UL Listed Sub-Assembly power supply/charger converts a 115VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.
This product replace AL4000ULXB

Specifications:
Input:

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output:
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision:
  • AC fail supervision (form C contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form C contacts).
  • Battery presence supervision (form C contacts).
Visual Indicators:
  • AC input, DC outputand Battery LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.):
      • 12VDC: 25 BTU/Hr.
      • 24VDC: 37 BTU/Hr.
  • System AC input VA requirement: 402.5VA.

Item#:
AL400ULXB2
You must be logged in to order this item. Log in here

SW, SHORT ROLLER BALL WHT 1-056-001

Item#:
DS-01T-W
You must be logged in to order this item. Log in here

Alula Video Doorbell Camera

The Video Doorbell can be used as a stand alone video surveillance system or as part of a more holistic security and automation system when paired with Alula’s Connect+ or BAT-Connect. Offer customers what they need now, plus give them an option to an expandable security & automation platform in the future
  • 2K HD Video
  • Two Way Audio
  • Motion Detection
  • Dual Band Wi-Fi
  • 170 Degree FOV
  • 16 foot Night Vision
  • IP65 weatherproof
  • 2MP Image Sensor
  • Micro SD Card included
  • White Exterior 
Item#:
CAM-DB-HS2-AI
You must be logged in to order this item. Log in here

Wall mounting plate for LED Ke ypad (RE663) and Touchpad (RE6

Item#:
CP-WALLPLATE-5
You must be logged in to order this item. Log in here

Outdoor weatherproof power supply for V723, V724X, 12VDC

Item#:
ADC-PSU-12V1AOUTDOOR
You must be logged in to order this item. Log in here

AL400UL UL PS W/LARGE GRY CABT 4 amp or 24VDC @ 3 amp, AC &

Input

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision
  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts).
Visual Indicators
  • AC input, DC outputand Battery LED indicators.
Item#:
AL400ULX
You must be logged in to order this item. Log in here

StarLink 100' Extended Remote Antenna Kit

Extended Remote Antenna Kit for use with cellular fire communicators, suitable for outdoor or indoor applications. Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 100' LMR 400 Coax Type N male to SMA male terminated cable, one (1) SMA female to TNC male adapter for use with competitive communicators. Also includes SLE-ANTEXT-ISO Commercial Fire Ground Fault Isolation Plate.
Item#:
SLE-ANTEXT100
You must be logged in to order this item. Log in here

IQ Panel 2 Battery

The IQ Battery is the factory replacement battery for the IQ Panel 2 and 2 Plus.
  • 3.7V
  • 3200mAh
  • 11.8 Wh
  • For use with the IQ Panel 2 and 2 Plus
Item#:
QR0041-840
You must be logged in to order this item. Log in here

WSS 2000 In/Outdoor Detector/Transmitter

The TD-20U is the battery-powered sensor transmitter for the RCTD-20U (Wireless 2000). The detection pattern is selectable, allowing for a 17 foot fan pattern or 50 foot beam pattern, and sends a signal back to the RC-20U chime box when compromised. The device is powered by a standard 9V battery (not included), and up to nine TD-20U's can be added to one RC-20U receiver.
***Products are backwards compatible and will work with the RC-10U

  • Series***

    Features:
    • Operates on a 9V lithium or alkaline battery
    • Choose 50ft. Long Range or 17ft. Fan (Wide) detection pattern
    • Weather proof housing (IP54 rating) for both indoor and outdoor use
    • Uses passive infrared to detect motion and send RF signals to receivers
    • 2000ft. transmission range (line of sight)

    • Item#:
    TD-20U
    You must be logged in to order this item. Log in here

    PLUG, PREWIRE 3/8" WHITE

    Item#:
    PW-375-W
    You must be logged in to order this item. Log in here

    Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

    Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

    Specifications:
    Input:

    • 16VDC from TP1640 plug-in transformer.
    Output:
    • 6VDC or 12VDC selectable output.
    • 2.5A continuous supply current.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
    Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
    • Battery short circuit protection (circuit breaker).
    Visual Indicators:
    • AC input and DC output LED indicators.
    Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
    • BTU/Hr. (approx.):
      • 6VDC: 8 BTU/Hr.
      • 12VDC: 15 BTU/Hr.
    • System AC input VA requirement:
      • 6VDC/12VDC: 276VA.

    Item#:
    SMP3ET
    You must be logged in to order this item. Log in here
    |◀ ◀ 37 - 48 of 8409 ▶ ▶|
    View:
    (Denotes required field.)