Home  >  INTRUSION  > (x)
|◀ 49 - 60 of 8475 ▶|
View:

The TD-20U is the battery-powered sensor transmitter for the RCTD-20U (Wireless 2000). The detection pattern is selectable, allowing for a 17 foot fan pattern or 50 foot beam pattern, and sends a signal back to the RC-20U chime box when compromised. The device is powered by a standard 9V battery (not included), and up to nine TD-20U's can be added to one RC-20U receiver.
***Products are backwards compatible and will work with the RC-10U

  • Series***

    Features:
    • Operates on a 9V lithium or alkaline battery
    • Choose 50ft. Long Range or 17ft. Fan (Wide) detection pattern
    • Weather proof housing (IP54 rating) for both indoor and outdoor use
    • Uses passive infrared to detect motion and send RF signals to receivers
    • 2000ft. transmission range (line of sight)

  • Item#:
    TD-20U
    You must be logged in to order this item. Log in here

    Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

    Specifications:
    Input:

    • 16VDC from TP1640 plug-in transformer.
    Output:
    • 6VDC or 12VDC selectable output.
    • 2.5A continuous supply current.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
    Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
    • Battery short circuit protection (circuit breaker).
    Visual Indicators:
    • AC input and DC output LED indicators.
    Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
    • BTU/Hr. (approx.):
      • 6VDC: 8 BTU/Hr.
      • 12VDC: 15 BTU/Hr.
    • System AC input VA requirement:
      • 6VDC/12VDC: 276VA.

    Item#:
    SMP3ET
    You must be logged in to order this item. Log in here
    You must be logged in to order this item. Log in here
    You must be logged in to order this item. Log in here

    Remote Antenna Kit, Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 50' LMR 300 Coax Type N male to SMA male terminated cable. Also includes one (1) SMA female to TNC male adapter for use with competitive communicators

    Item#:
    SLE-ANTEXT50
    You must be logged in to order this item. Log in here
    You must be logged in to order this item. Log in here

    The IQ Recessed-S is our most powerful S-line sensor ever. Leveraging the proprietary S-Line Technology, to encrypt signals sent to the panel. The IQ Recessed-S is installed in the core of your door, forever changing the idea of security and smart home applications. Create rules such as "when door opens, turn on the light" or "if door left open, adjust my thermostat to save energy until it is closed again." With the longest and most powerful range of our S-Line, you want to make sure the IQ Recessed-S makes it into every door you own.

    • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
    • Placed in the core of your door for an almost invisible installation
    • Powerful earth magnet for a strong connection
    Item#:
    QS1134-840
    You must be logged in to order this item. Log in here
    Item#:
    PADP3/SS/BK/NO
    You must be logged in to order this item. Log in here
    You must be logged in to order this item. Log in here

    The console battery pack can be purchased separately for use with a GC2 Panel to extend battery life or to use as a replacement battery.

    Features:

    • Optional extra capacity battery
    • Replaces standard internal Control Panel battery
    • Required for UL985 fire warning system listing
    • Nickel metal hydride (NiMH) battery

    Item#:
    2GIG-BATT2X
    You must be logged in to order this item. Log in here
    Extended Remote Antenna Kit for use with cellular fire communicators, suitable for outdoor or indoor applications. Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 30' LMR 300 Coax Type N male to SMA male terminated cable, one (1) SMA female to TNC male adapter for use with competitive communicators. Also includes SLE-ANTEXT-ISO Commercial Fire Ground Fault Isolation Plate.
    Item#:
    SLE-ANTEXT30
    You must be logged in to order this item. Log in here
    You must be logged in to order this item. Log in here
    |◀ 49 - 60 of 8475 ▶|
    View:
    (Denotes required field.)