The Inovonics EN1210W door/window transmitter with reed switch includes a built-in, side mounted magnetic reed switch, with a magnet that supports a 5/8in. gap.

Features:

• Contains wired input and magnetic reed switch input
• For use with almost any standard NO/NC contact
• Mounting bracket included for quick and easy installation
• Includes case tamper protection
• Fully supervised

GEM-RECV96 will accommodate up to 96 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.

Features:

• 8 hardwire or wireless zones on board; instantly EZ-Zone doubled to 16with NO additional equipment or cost! Up to 32 zones with multiplex expansion
• Including 2 2-wire fire zones (7;8)
• EZ Programming at keypad
• Up to 32 user codes
• Up to 2 areas
• Fuseless, maintenance-free operation
• Supports up to 7 keypads (see chart p.3)
• 3 on-board relay outputs; expandable to 8 relay outputs
• Up to 2 RF receivers
• Interior bypass groups
• Up to 8 X-10 devices supported for 16 different events
• 400 event log
• Auto arm

The GEM-KEYF is a multifunction pendant/keychain transmitter compatible with Napco GEM-Series wireless systems. It serves as an area arm/disarm device with two auxiliary functions, and may be used as a police panic and/or auxiliary emergency transmitter. A 3V Lithium coin cell battery (type CR2032) powers the GEM-KEYF transmitter. A flashing LED indication signals a low-battery warning to replace the unit.
The GEM-KEYF leaves the factory as a remote area arm/ disarm transmitter with two Auxiliary buttons, A1 and A2. Auxiliary functions are selected by programming Key Fob Transmitter Aux 1 and Aux 2 options: Panic, Auxiliary, or Instant protection. In addition, any of the panel's Relay Groups may be selected for controlling garage doors, exterior lighting, or other applications

The DS1100i Detector Series uses microprocessorbased sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1101i can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The round detectors mount on the ceiling or walls.

Features:

• Microprocessor-based sound analysis technology (SAT)
• Automatic environmental test circuitry
• Sound check

Compatible with Alexor, Impassa and PowerSeries V4.5.