S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
To enroll the DWS-LL, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the LongLife sensor. Alternatively, the LongLife sensor can be enrolled by scanning its bar code using the Alula app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the DWS-LL, begin by removing the adhesive paper and adhering the LongLife contact and magnet on a door or window. Clean the surface of where you plan on mounting it. Leave a minimum of 3/16 inch clearance around the ends of the sensor to allow the cover to open. Make sure to align the alignment marks on the LongLife and magnet when mounting. Alternatively, LongLife can be used with an external contact instead of the reed switch.
The High Bond Tape (3M VHB Tape) works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The LongLife wireless performance is optimized when mounted near the top of the door in a vertical orientation.
- Low-profile design
- Easy, slide-open cover
- Battery pull-tab enrollment
- 5-year product warranty
- 10-year battery life (replaceable)Â
Contains one HS2032NK control panel in a PC5003C cabinet, one HS2LCD Full Message LCD Hardwired Keypad, a BD7-12 12V, 7Ah battery, a PTD1640U standard efficiency transformer and a SD15WULF indoor siren.
The Panic Button Remote is a compact, battery powered, wireless panic button that transmits an Emergency signal from any location within radio frequency (RF) range of the control panel. The signal can be transmitted to the control panel, whether the security system is armed or disarmed.
Features:
- Ethernet Port
- Backup Battery
- UL Compliant
- Snap-in Modules
- Bluetooth Smart Radio Transceiver
- LTE: RE929RPV
- WI-FI: RE926RS
- Z-WAVE: RE934Z
- COMBINATION: RE934ZT
- Quick peel and press mounting
- Small profile for a near invisible look
- Most flexible magnet positioning in the industry
- Strip & Stick external contact holes
- 5 year warranty
- Compatible with existing burglary sensors going to new panels being installed from other manufacturers
- Translators will enroll: Keyfobs, DWS, Glassbreaks, PIRs, etc.
- Translates each sensor’s alarm, supervisory and trouble signals to the panel
- Dual antennas for receive and transmit diversity ensure reliable range
- Separate ID for supervision of Translator’s tamper, power supply, and low battery
- External 12VDC power supply required (sold separately)
The Super Switch is 2GIGs wireless takeover module. This unit was designed to convert 8 hardwired zones into eight wireless zones, make installation simple, and work with existing 12volt control panels. The module is to be mounted next to the existing Control Panel where the hardwired zones are connected. All of the zones on the Super Switch act as supervised wireless zones.
Features: