The GEM-GB is an advanced wireless acoustic glass-break detector for use with all Gemini-Series control panels and receivers. Each transmitter has a unique RF ID code (printed on the sensor module and on the rear case) that distinguishes itself to the receiver. Refer to control-panel instructions for entering this code and its checksum digit into the panel. Be sure to enter all numbers and/or letters, including leading zeros, if any. The detector is powered by two type DL123A 3-volt lithium batteries, which are factory installed. To energize the unit, simply install the supplied Power-Up Jumper across pins JP1 near the positive terminals of the batteries.

Features:

• Superior immunity to false alarms
• Excellent detection, even through blinds and light drapes
• 25 ft. radius
• Automatic test for easy installation
• Hand-clap test for sensor verification
• Includes lithium batteries

Features:

• 8 hardwire or wireless zones on board; instantly EZ-Zone doubled to 16with NO additional equipment or cost! Up to 32 zones with multiplex expansion
• Including 2 2-wire fire zones (7;8)
• EZ Programming at keypad
• Up to 32 user codes
• Up to 2 areas
• Fuseless, maintenance-free operation
• Supports up to 7 keypads (see chart p.3)
• 3 on-board relay outputs; expandable to 8 relay outputs
• Up to 2 RF receivers
• Interior bypass groups
• Up to 8 X-10 devices supported for 16 different events
• 400 event log
• Auto arm

The GEM-KEYF is a multifunction pendant/keychain transmitter compatible with Napco GEM-Series wireless systems. It serves as an area arm/disarm device with two auxiliary functions, and may be used as a police panic and/or auxiliary emergency transmitter. A 3V Lithium coin cell battery (type CR2032) powers the GEM-KEYF transmitter. A flashing LED indication signals a low-battery warning to replace the unit.
The GEM-KEYF leaves the factory as a remote area arm/ disarm transmitter with two Auxiliary buttons, A1 and A2. Auxiliary functions are selected by programming Key Fob Transmitter Aux 1 and Aux 2 options: Panic, Auxiliary, or Instant protection. In addition, any of the panel's Relay Groups may be selected for controlling garage doors, exterior lighting, or other applications

The ELK-120 v.3 features 4 channels that can be configured as 2 channels of siren and 2 channels of voice, or all 4 channels can be used for voice. Either way the voice channels are fully recordable and are stored in non-volatile re-programmable memory. Total time of recording is 8 minutes. The Siren channels offer a choice of: Classic Yelp Sound, Temporal Coded Horn, or Pulsing Industrial Horn.

The siren sounds can be triggered in sequence with the voice channels. The channels can be configured to play once or to repeat endlessly. Two channels support our unique ComboTrigger feature, especially designed for controls that have a single alarm output with a pulsing option for fire or burglary. When pulsed, the Temporal Coded Horn fire signal is sounded. The optional ELK-129 Computer Interface may be used to download .WAV sounds from a PC to the ELK-120. Also available is the ELK-124 offering eight recordable voice channels of 1 minute each.
Includes:

• ELK-120 4 Channel Recordable Driver
• Double Sided Foam Mounting Tape
• Instructions