S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- 12 to 24 Volt DC Operation
- Adjustable Time Delay
- SPDT (Form "C") Relay
- Low Current Input Trigger (<1ma)
- Selectable Positive or Negative trigger
- Selectable Initial Relay State: ON / OFF
- Operating Modes: One-Shot or Repeat
- LED Indication of Relay State
- Operating Voltage: 12 to 24 Volts DC.
- Current Draw: 40 mA DC with relay on.
- Time Settings: 1 to 60 Seconds or 1 to 60 Minutes.
- Relay Contacts: Form "C", 7A @ 30VDC, 10 A @ 125VAC.
- Size: 3" x 2.2" x 1" (Fits Standard. Snap Track).
- Trigger Voltage: 4.5 - 24VDC.
- Works With Any 12 Volt Control Panel
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75" X 2.185"(44.5mm X 55.5mm)
The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:
- 1 Low Battery Cutoff & Master Power Switch
- 2 pieces of Double Sided Tape
- Instructions
- Works With Any 12 Volt Control Panel
- Automatic Low Battery Cutoff Protects Battery From Deep Discharge
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Lifetime Limited Warranty
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp.
Also available in a 4 pack (ELK-9244) which is packaged as 4 relay modules grouped on a pre-scored break-off circuit board.
Includes:
- (1) ELK-924 Relay
- 6 pieces of Double Sided Mounting Tape
- Instructions
- Super Low 1.2 mA Trigger Current
- Positive (+) Or Negative (-) Trigger Input
- Double Form C Contacts DPDT
- Heavy Duty Contact Rating
- On Board LED Status Indicator
- Includes Double Sided Mounting Tape
- Mounts in Standard 2.75 in. Snap Track
- Packaged in Reusable Poly Storage Box
- Lifetime Limited Warranty
- Operating Voltage: 12 or 24 Volts DC, jumper selectable
- Current Draw: 60mA (both relays on)
- Relay Contacts: Form C , 7A @ 30VDC, 10 A @ 125VAC
- Size: 1.5 in. X 2.75 in.
- Trigger Voltage: 5 - 24VDC
- Trigger Current: 1.2mA @12 VDC
S2K Administration - Form Template Display
Actions